CWDP-303 Practice Exam Questions with Answers Certified Wireless Design Professional Certification

A company wants to connect its headquarters to its remote office that is 13 kilometers away using a wireless bridge. What requirement must not be forgotten by their Wireless Engineer when considering the Fresnel Zone?

When designing a WLAN to support voice in a large office, which design element is of the highest concern for performance?

Your customer requires a security solution in which client credentials are used and the authentication server must have a certificate with optional client certificate use. Which EAP method would be the best fit for their requirement?

When using a predictive design tool, you have selected APs with an antenna gain 3 dBi and set the transmit power of the predicted APs to 25 mW. What should be EIRP of the APs in the design?

Which document provided to your customer should include all devices and parts that are going to be used during the deployment of their WLAN infrastructure?

What document is typically created to launch a project?

What is the best method of gathering attenuation measurements from any building materials or objects?

Switches and APs have already been chosen by your customer. All switches support 802.3bz MultiGig interfaces and APs are 4x4:4 802.11ac wave 2 capable of using dual-5GHz and have one MultiGig interface. Some cable drops for the APs will run for more than 180.5 feet (or 55 meters). To support MultiGig, what is the best choice of cabling?

What advantage provided by 802.11n and 802.11ac is not usable in 1X1:1 low-end client devices?

What metric implements the simplest algorithm and lowest accuracy in networks requiring locations?

When deploying APs outdoors, what additional component needs to be used that is not needed indoors?

Why should band steering algorithms allow stations to connect to the 2.4 GHz band after some number of ignored Probe Requests?

After deploying a 5 GHz-only WLAN infrastructure in the USA, using 20 MHz channel-widths and all 25 available channels, one of the managers of the company brings his 802.11n tablet to the office to test the Guest SSID. While testing, there were several spots where we would get poor RSSI (below -80dBM) or none at all. You checked the WLAN infrastructure and all APs are up and running and you’ve validated coverage after deployment. What is causing this issue?