Practice Free 300-365 Deploying Cisco Wireless Enterprise Networks Exam Questions Answers With Explanation

A customer wants to restrict the number of SSIDs being offered in a specific location, but with a single WLC

enterprise wide. The customer is enabled to delete the SSIDs globally without impacting users at other sites.

Which action fulfills this requirement?

Five identical APs at a branch office must be upgraded. You consider using the FlexConnect AP Upgrade

feature. Which two statements about this feature are true? (Choose two.)

An engineer has all of the remote locations using a pair of FlexConnect WLCs with locally switched WLANs and must leverage local certificate based authentication. Whichcomponent must be configured?

You have set up FlexConnect APs. For which scenario is Fast Roaming supported, providing theWLAN is mapped to the same VLAN and the client is roaming to an AP on the same Cisco WLC?

You have just added a new MSE to Prime Infrastructure and want to synchronize the MSE with your 5508 WLC. which is located behind a firewall in a DMZ. You notice that NMSP messages are failing between the twodevices. What traffic needs to be allowed on the Firewall to ensure the MSE and WLC can communicate using NMSP?

What is a realistic way to minimize inter-controller roaming in a large multibuilding campus?

A customer has implemented an N+1 cluster of WLCs without using an AP high availability configuration and is

experiencing an unacceptable delay when clients areroaming. Which two configuration changes can improve

roaming? (Choose two.)

Refer to Exhibit.

What two items need to be supported on the VoWLAN phones in order to take full advantage of this WLAN configuration? (Choosetwo.)

A customer requires that an SSID is broadcasted to specific access points that use certaininterfaces. Which feature can be used to achieve this goal?

Scenario

One of your colleagues has setup a test network in the lab to simulate a new building atone of your regional offices. Your team is testing AP failover. Your colleague has requested you to configure the WLCs so that in the event of a loss of one of the WLCsthe other wings APs will fail over to the remaining WLC.

The APs on the East-WLC-2504A should fail over to the West-WLC2-2504A, and the APs on the West-WLC2-2504A should fail over to the East-WLC-2504A.

Set the priority of the APs so the backup controller recognizes the join request from the higher-priority AP and if necessary disassociates a lower-priority AP to provide accessto an available port.

Not all menus, tabs and features are supported.

Topology

An engineer is attempting to send multicast data to all multicast routers inthe network with ID 338789750.

Which IP address should be used?

Which feature must be enabled on a WLC to ensure that ARP, DHCP, and data traffic can be forwarded to wired clients located behind non-Cisco workgroup bridges?

A large number of clients are trying to stream an on-demand instruction in a large auditorium. Which two

configuration changes on the WLC ensure that there is enough bandwidth to support the client load without adding any APs? (Choose two.)

Branch wireless users report that they can no longer access services from head office but can access services

locally at the site. New wireless users can associate to the wireless while the WAN is down. Which three

options (Cisco FlexConnect state, operationmode, and authentication method) are seen in this scenario?

(Choose three.)

After a wireless deployment, users report that wireless voice clients are experiencing an unacceptable amount of delay while roaming during a call on theCisco Unified 7925 Series phones. The customer environment consists of multiple controllers, all running 7.4.121.0 code, operating in a centralized deployment. What configuration issue is most likely contributing to the problem?

Which 802.11 standard is TSpec part of?

A network engineer is debugging issues with the mDNS gateway. Which type of reply should be seen in the Wireshark capture when querying for a mDNS service in the Bonjour Cache?

Which option is a calibration of a Cisco MSE deployment limited to whenthat deployment is using the linear

point collection method?

A customer is implementing amassively scaled guest wireless network to support approximately 32,000 clients. For ease of administration, they have required implementing multiple interfaces defined on the WLC and mapped to a single interface group. Which configuration meets this need?

An engineer must ensure that clients on an 802.1x WLAN can roam as fast as possible at a remote site that was deployed with FlexConnect. Which configuration ensures that this roaming occurs?