Practice Free 350-601 Implementing Cisco Data Center Core Technologies v1.1 (350-601 DCCOR) Exam Questions Answers With Explanation

What happens when a Cisco MDS 9000 Series Switch with a single supervisor module is upgraded using a nondisruptive upgrade and the supervisor module reloads?

An engineer is implementing VSANs on a Cisco MDS 9000 Series Switch with a native Fibre Channel. The deployment must meet these requirements:

The host on port fc1/1 must be assigned to VSAN 10.

The port channel 10 ISL must pass multiple VSANs. including VSAN 10.

Which configuration set meets these requirements?

Refer to the exhibit. A Cisco data center environment is implemented with vPC. The web server replies using the SVI MAC address as the Layer 2 header instead of the HSRP MAC address on VLAN 23. This behavior causes packet drops on the Cisco Nexus 9000 Series Switches due to the vPC loop prevention mechanism The requirement is for the vPC feature to allow N9K_1 and N9K_2 to forward traffic between the NAS server and the web server, even if the HSRP ' s MAC address is not used on Layer 2 headers for VLAN 23. Which feature must be used to accomplish this goal?

An engineer must configure a Fibre Channel port channel on a Cisco Nexus 9000 Series Switch. The configuration must meet these requirements:

A port-channel protocol negotiation is performed with the peer ports.

The trunk mode must be explicitly configured for the interfaces.

VSANs from 10 to 20 must be allowed.

Which command set configures the devices to meet the requirements?

What is a disadvantage of deploying network-attached storage (NAS) versus Fibre Channel for storage?

Which data interchange format is presented in this output?

Refer to the exhibit. The network 10.1.1.15/32 is advertised to N9K1. N9K2 and N9K3 OSPF neighbors in area 1. Which configuration advertises network 10.1.1.15/32 as LSA type 7 to N9K3?

A network engineer must configure a power redundancy policy on a Cisco UCS C-Series Rack Server. The power redundancy must support two power sources being used to power the server. Which configuration should be applied to meet the requirement?

Which component is, by default, excluded from the host firmware package on a Cisco UCS B-Series Server?

Refer to the exhibit A network administrator experiences these issues with the network:

PC1 is experiencing a buffering problem for video applications

The servers that are connected to SW2 are experiencing packet drops when they connect to the Internet

The engineer wants to configure the required traffic capture to investigate the issue further Which configuration must be implemented to monitor the traffic?

What is the advantage of using the NFS protocol versus the ISCSI or FCoE SAN protocols?

The Cisco TACACS+ on a Cisco Nexus Series Switch must authenticate any user attempting to access the device and fail over to the local account if the TACACS+ server becomes unavailable. Which command accomplishes these goals?

Refer to the exhibit An engineer must provision a VXLAN deployment The OSPF has already been configured as the underlay protocol All BGP configurations will be performed using the template method The deployment must meet these requirements

The local update source for leaf switches must be loopback 1

The router ID must be the local loopback IP address

The external BGP connections must use a template name

Drag and drop the configuration snippets from the bottom to complete the configuration

Which Cisco solution provides SAN slow-drain analysis?

Refer to the exhibit. An engineer logs all occurrences of a configuration being saved. The engineer must generate an additional log message when someone attempts to change the configuration for interface Ethernet 1/1.

Which set of commands must be used to meet these requirements?

A)

B)

C)

D)

Refer to the exhibit. An engineer must create a scheduler task on a Cisco Nexus 9000 Series Switch at 06:00 AM. The task must save the running configuration to a file in the bootflash, then transfer the file from the bootflash to a TFTP server Which command must the scheduler task run after the running configuration is copied to the bootflash?

An engineer installed a new Nexus switch with the mgm0interface in vrf management. Connectivity to the rest of the network needs to be tested from the guest shell of the NX-OS. Which command tests connectivity from the shell of the NX-OS?

Refer to the exhibit A network engineer must use a Cisco on-box Python CLI to configure the BGP AS 65501 on Cisco Nexus 9000 Series Switch The output from the command must be returned as raw output instead of JSON format Which command set must be used to complete the configuration?

Which feature of Cisco Nexus Dashboard permits users to switch between site controllers of Cisco ACI?

Refer to the exhibit. An engineer implements an FCoE Unified Fabric where vPC exists between N9K-A and N9K-B. To avoid rate discards, bandwidth must be regulated to account for sent traffic that exceeds the access speed. Which set of commands completes the configuration?

A)

B)

C)

D)

An engineer must perform a POAP deployment of a Cisco Nexus 9000 Series Switch The switch must automatically receive its software Image and configuration file upon power-on. Also only UDP Is permitted between the Nexus 9000 switch and the server that hosts the Cisco NX-OS system images. Which set of actions completes the configuration?

An engineer must deploy a new Cisco MDS 9000 Series Switch and be able to receive LinkUp/LinKDown notifications that were sent using a secure industry standard. Which technology must be used to accomplish this goal?

Refer to the exhibit. A network engineer uses Ansible to automate the provisioning of different ACI tasks. The current design requires that each application profile has a single applications. All application EPGs must belong to the same configured bridge domain Which set of actions must be taken to accomplish this goal?

A network engineer must perform a standard ISSU in an end-of-row switch with two supervisors. The upgrade must be executed using the default parallel method. Drag and drop the options from the left into the sequence on the right to describe the parallel method upgrade for the switch modules?

An engineer musí Implement fabric binding on the Cisco MDS 9000 Series Switch lor only VSAN 110. Both WWNs must be part of domain 110. The configuration for the active VSAN must be compared to the active configuration after the deployment Is completed. Drag and drop the code snippets from the bottom onto the blanks In the code on the top to complete the configuration. Not all code snippets are used

An engineer needs to install a new package on a Cisco Nexus 9000 Series Switch. What is the impact of running the install commit < filename > command on the switch?

A customer has a requirement to deploy a cloud service and needs to have full control over the underlying OS, data and application. Which cloud model meets this requirement?

What occurs when the following command is run on a Cisco Nexus 9000 Series Switch?

Nexus01# install all epld n9000-epld.9.2.4.img

A new employee must be granted access to add VLANs into an existing Cisco UCS Manager and configure NTP synchronization with date and time zone settings. Which two privileges must be granted to the employee to complete the task? (Choose two.)

Refer to the exhibit. Which configuration ensure that the cisco Nexus 7000 series switches are the primary devices for LACP?

Refer to the exhibit. Software downgrade is required on a Cisco Nexus 7000 Series Switch. What is displayed when this command is executed?

An engineer must configure an ERSPAN session on a Cisco Nexus 9000 Series Switch. The mirrored traffic originates from the remote IP address 10.10.10.10 and must be forwarded to a network analyzer connected to Ethernet1/10 on the Nexus switch. Which configuration accomplishes this goal?

An engineer must upgrade the server firmware for which the service profile is configured with a host firmware package. Which action must be taken to accomplish this goal?

A network engineer evaluates cloud services for a customer. The customer requires the cloud service to provide tools that enable provisioning, customization, scaling, and management of a specific application. Which cloud service model meets these requirements?

A cisco mds 9000 series switch must automatically learn about devices and

switches connected to a fibre channel interface. However

a conflicting entry exists in the configuration database.

Which set of actions activates the configuration database?

Refer to the exhibit. The router R1 and N9K1 establish EIGRP neighborship. R1 is advertising network 10.1.1.15/32 to N9K1 and N9K2 and N9K3 are forming the OSPF neighborship over area 1 Which configuration prevents N9K3 from receiving external LSA for network 10.1.1.15/32?

A)

B)

C)

D)

An engineer must integrate Cisco ACI with VMware vCenter The visualization team configured the necessary port groups and assigned them to virtual machines through VMware vCenter The final port group configuration must be protected from being changed by Cisco APIC Which action accomplishes these goals ' ?

Refer to the exhibit. What is the outcome of this command when the EPLD is updated on a Cisco Nexus 9000 Series Switch?

Refer to the exhibit. The traffic flow from the storage device fails to communicate with the DB-Pod device. The engineer must configure a monitoring feature to analyze the issue. Drag and drop the configuration snippets from the bottom onto the boxes on the top to deploy the monitoring feature on MDS97K. Not all commands are used. Not all options are used.

An engineer must configure a Cisco UCS blade system managed by Cisco UCS Manager. All four connected interfaces between the blade chassis and the fabric interconnects must be used. In addition, connectivity must tolerate the failure of any link between the I/O module and the fabric interconnects. Which action accomplishes these requirements?

An engineer must configure OSPF routing on Cisco Nexus 9000 Series Switches. The IP subnet of the Eth 1/2 interface for both switches must be advertised via OSPF. However, these interfaces must not establish OSPF adjacency or send routing updates. The current OSPF adjacency over the interface Eth1/1 on SW1 and Eth1/1 on SW2 must remain unaffected. Which configuration must be applied to both Nexus switches to meet these requirements?

Refer to the exhibit Which port type must be used to complete the configuration of a monitoring session that sends traffic to a monitoring device ' ?

What is the function of network file storage?

An administrator in UCS Manager must enable its users to reboot and decommission the servers and perform backup jobs Which set of user privileges permits these activities?

Refer to the exhibit. User1 and User2 are connected to VTEP1 switch. The users can reach the WEB server. The monitoring tool shows degrading network performance and excessive traffic is sent from User2 to reach the WEB server. Which storm control percentage levels must be used to suppress traffic from User2 and allow all traffic types from User1?

An engineer performs a Cisco UCS C480 ML M5 installation from a Cisco UCS Manager As a part of the design the server must perform an iSCSI bool from the storage array Which configuration must be performed in the SAN settings in the root organization to satisfy that condition?

An engineer implements an environment with multiple traffic types on a consolidated I/O link between Cisco Nexus 9000 Series Switch and MDS 9000 Series Switch The configuration must meet these requirements:

The unified I/O link must support LAN and SAN traffic.

A single, multipurpose Ethernet transport must be used.

The configuration must discard MAC addresses that are not part of the current fabric.

The QoS markings must be preserved.

Which configuration set meets the requirements?

Drag and drop the hyperflex characteristics from the left onto the appropriate. HyperFlex Node types on the right. Not all options are used.

Which two components are used by the Cisco Nexus switches telemetry process? (Choose two.)

Which feature of the Cisco Nexus Dashboard Insights uses Duo to reduce the risk of static passwords?

Service degradation is reported on a VM that is deployed on a Cisco UCS blade server. The traffic from the vNIC is required to SPAN in both directions to a packet analyzer that is connected to UCS-A slot 2 port 12. Which two commands are needed to complete the configuration? (Choose two.)

What is the impact of an electronic programmable logic device upgrade on a Cisco MDS 9000 Series Director Switch with dual supervisors?

An engineer needs a utility that translates traditional Cisco Nexus CLI commands and generates code using XML and JSON message formats. The utility must be available on a Cisco Nexus 7700 Series Switch. Which utility must be used?

What occurs during a scheduled electronic programmable logic device (EPLD) update of a Cisco fabric switch supervisor module?

What is an advantage of using Network File System (NFS) rather than Storage Area Network (SAN)?

An engineer must configure a user role interface policy on a Cisco Nexus 9000 Series Switch. The role must prevent access to interface FC3/2 but allow access to interface FC3/1. Which

set of actions must be taken to accomplish this goal?

A Cisco ACI fabric is created with a single L30ul with R1 and R2 The requirement is to prevent all received subnets from R1 and R2 from communicating. Which configuration accomplishes this goal?

Which protocol does Cisco Hyperflex use to share data among nodes in a VMware vSphere environment?

A network engineer must configure a Cisco MDS switch to use the local user database for console access if all AAA servers are unreachable. Which configuration should be applied to complete this task?

Which two features are used to allow a nondisruptive upgrade for the ISSU process? (Choose two.)

Which FC mode is the device MDS-9148S-2 operating in?

Which NFS version uses the TCP protocol and needs only one IP port to run the service?

Refer to the exhibit. An engineer must Implement an Application Performance Monitoring (APM) for the production servers on the Cisco Nexus 93180 Series Switch-based Infrastructure in data center 1. The APM solution must meet these requirements:

It must copy all inbound and outbound production traffic.

It must support real-time telemetry.

Which configuration must be used on data center 1 switches to meet these objectives?

An engineer needs to perform a backup of user roles and locales from Cisco UCS Manager to replicate the setting to a different fabric interconnect. The engineer wants to review the file before importing it to a target fabric intercon- nect. Which backup type must be selected to meet these requirements?

An engineer must configure Protocol Independent Multicast on two Cisco Nexus 9000 Series Switches. The engineer must ensure that the chosen rendezvous point (RP) uses a mapping agent and only supports one RP per multicast group. Which type of RP must be used on both switches to meet these requirements?

An engineer must develop a Python script that generates an interface configuration JinJa template called port_config.j2 with values defined in a Python dictionary

called int_dict. The generated output must be written to a file called port.conf in the same directory as the Python script. Which line must be added to complete the script and send the

interface configuration generated to a Cisco Nexus switch using SSH?

A QoS policy on Cisco UCS must meet mese requirements:

No-drop class must be configured

Jumbo frames must be enabled without fragmentation.

Which configuration must be implemented to meet mese conditions?

A customer reports Fibre Channel login requests from unauthorized sources to a Cisco MDS 9000 Series Switch. The customer requires a feature that permits devices already logged in and learned by the switch to be added automatically to the Fibre Channel active database. Which two features must be enabled? (Choose two.)

An engineer is configuring a vHBA template in Cisco UCS Manager. The engineer needs to specify the logical addresses used by the vHBA and the path through which the SAU Traffic flows. Which two resources must be specified in the vHBA template? (Choose two)

Refer to the exhibit.

Two Cisco Nexus Series Switches use EIGRP between their Eth1/1 interfaces. The switches are configured to support EIGRP authentication. Which set of CLI

commands must be used to establish EIGRP neighborship?

An engineer must implement private VLANs for a group of Cisco UCS 8-Series servers. The primary VLAN is present, But the secondary VLAN must Be added to Both fabrics. Which configuration set accomplishes this task?

Refer to the exhibit. A traffic collector virtual machine is installed inside the Cisco UCS server. The collector must monitor traffic that is received on G1/2 with ERSPAN. Which set of

actions must be taken to send the traffic to the traffic collector?

Refer to the exhibit. Which two code snippets must be used to display the configuration of the Cisco Nexus 9000 Series Switch? (Choose two.)

Refer to the exhibit. An engineer must configure a new user name called user 1 in a UCS domain hosting multiple sub-organizations The security policy mandates that the role of admin cannot be used The user name must have these permissions:

Which configuration must be used for user 1 to have these permissions?

Refer to the exhibit.

The server is sending traffic to the storage server using Fiber Channel protocol. The requirement is for the N5K-1 to forward traffic to MDS9k-1. Drag and drop the configuration steps from the right to complete the configuration for N5K-1 on the left. Not all configuration steps are used.

What is the effect of using firmware auto sync server policy in Cisco UCS Manager?

Drag and drop the telemetry concepts from the left onto their functions on the right.

An engineer configured an environment that contains the vPC and non-vPC switches. However, it was noticed that the downstream non-vPC switches do not receive the same STP bridge ID from the upstream vPC switch peers. Which vPC feature must be implemented to ensure that vPC and non-vPC switches receive the same STP bridge ID from the upstream vPC switch peers?

What are two capabilities of the Cisco Network Assurance

Engine? (Choose two.)

A network engineer must SPAN only the ingress traffic of a Cisco MDS 9000 series switch from interface fc 1/23 to interface fc 1/24. Which two configuration must be applied to complete this task? (Choose two)

Which solution provides remote and direct file-level access to users and systems?

An engineer must configure role-based access control in Cisco UCS Manager for a network analyst. The analyst must be able to configure syslog servers and review system logs. Which two default user roles must be assigned? (Choose two.)

A company plans to migrate some of its services to the cloud. The company does not want to manage or control the underlying cloud infrastructure. It also wants to maintain control over the deployment of its applications and configuration settings of the application-hosting environment. Which cloud service model meets these requirements?

Which package type must be installed to provide enhanced hardware functionality on a Cisco Nexus 9000 Series Switch?

A company is investigating different IT automation tools. The IT team has experience with the Python programming language and scripting using a declarative language. The proposed tool must be easy to set up and must not require an agent to be installed on target devices. The team must also be able to create custom Python modules to extend the tool’s functionality. Which automation tool meets these requirements?

What happens when the install all epid bootflash:m9000-pkg2-9.2.2.epid module all fan-module all bar all command is run on the Cisco MDS 9000 Series Director Switch?

Refer to the exhibit The VSAN 4041 and 4042 are exchanged between two Cisco MDS 9000 Series Switches called MDS-1 and MDS-2 The objective is to deploy a security mechanism on MDS-1 to allow MDS-2 to join the fabric exclusively Drag and drop the code snippets from the bottom onto the boxes in the code to complete the MDS-1 configuration Not all code snippets are used.

Refer to the exhibit.

An engineer runs a Python script from a newly enabled Guest Shell on a Cisco Nexus 93108 Series Switch. The script requires an additional package named Markdown from the Python package manager. Which tasks must the engineer perform to install the package?

A storage administrator notices an increasing number of storage targets that unexpectedly reach capacity, causing periodic service interruptions The administrator must now create and submit a daily report of the environment that shows the status of the storage targets with the highest capacities Which solution provides this information?

A new user with access privileges in the Finance department moves to a new Admin department. The user must have access privileges to the Admin department data and applications inside the Cisco UCS Manager. Which set of changes must be implemented in Cisco UCS Central for the user to acquire the privileges?

Which feature is supported with an In-Service Software Upgrade on a Cisco Nexus 9000 Series Switch?

What is the impact of a nondisruptive update on a Cisco MOS 9000 Series Modular Switch?

Drag and drop the network assurance concepts from the left onto the corresponding benefits on the right.

An engineer performs a Firmware Auto Install upgrade through the Cisco UCS Manager Which two Cisco UCS components are available to be upgraded in the Install Server Firmware stage? (Choose two.)

Refer to the exhibit. The gateway of Server 1 is in the VLAN 100 SVI on N5K-1 and the gateway of Server 2 is in the VLAN 200 SVI on N5K-2. Server 1 must connect to Server 2 using unidirectional traffic. Which action accomplishes this requirement?

Which set of actions must be taken to backup service profiles, MAC pools, and VLANs and transfer the back up file to the external server using authentication?

A network engineer needs to configure system logging on the Cisco MDS Series Switch. The messages must be displayed with the severity level of " warning " and above. For security reasons, the users must be logged out of the console after 5 minutes of inactivity. Which configuration must be applied to meet these requirements?

A)

B)

C)

D)

What is a benefit of using the Cisco UCS Lightweight upgrade feature?

What is an advantage of NAS compared to SAN?

Which nonproprietary protocol is used to access a NAS device?

An engineer is using REST API calls to configure Cisco APIC. Which data structure must be included in a POST message to receive a login token?

Refer to the exhibit. In a Cisco ACI fabric, the status of interface Eth1/1 changes frequently. Which set of actions configures the fabric to disable Eth1/1 when the port flaps more than 10 times within 1 minute?

An online retailer uses 200 cloud-hosted virtual machines (VMs). Currently, the configuration of each VM is performed manually. To support the growth strategy of the retailer, the retailer starts to automatically scale the VMs to meet demand and uses Ansible for configuration management. Which action must be performed in Ansible to meet the requirements before automation is performed?

Refer to the exhibit. An engineer must invoke a Python script that alerts the operations team when the router DC-RTR-1 becomes unreachable. Which configuration set accomplishes this task?

Refer to the exhibit. Which configuration must be applied for a network-admin account to have the same set of assigned roles and privileges in all UCS domain organizations?

Refer to the exhibit During a vPC peer switch reload, there is packet loss between the server and the router Which action must be taken to prevent this behavior during future reloads?

A network engineer must create an EEM script that saves a copy of the running configuration on bootflash and writes a message to syslog when a user saves the configuration to a Cisco Nexus switch. Which configuration set should be applied to complete this task?

An engineer must implement a disaster recovery policy for the Cisco UCS infrastructure. The solution must meet these criteria

The Recovery Point Objective must be 48 hours

The backup must use encrypted transmission

The Recovery Time Objective must be 4 hours

Which configuration set must be used in the scheduled backup to meet these requirements?

Refer to the exhibit.

A network engineer must configure port E1/31- 32 to forward only storage server traffic of VLAN 200 on Cisco fabric interconnects A and B. Port E1/31- 32 is not reserved for any other traffic. Which port type must be configured to accomplish this goal?

Refer to the exhibit. An engineer associates an ESX service profile to a blade server. The engineer adds a VLAN to the vNIC Template named vNIC-0 by using Cisco UCS Manager. The engineer discovers that the VLAN is missing on the vNIC of the ESX service profile. Which action adds the VLAN to the vNIC?

Based on this output, which storage protocol is used?

An engineer must implement an automation solution to allow the backup of the configuration of Cisco Nexus Series Switches to a centralized location. The solution must:

•Support the team-developed custom monitoring scripts that are packaged using RPM packaging that the framework must support

•Be decoupled from the underlying Cisco Nexus operating system.

•Have no impact on the operating system of the underlying switch if the resource contention occurs. •Use Python to expand the existing automation framework

Which solution meets these requirements ' ' Guest Shell

Which two components should be checked when a Cisco Nexus 9000 Series Switch fails to boot using POAP? (Choose two.)

An engineer must create a PowerShell script that leverages the Cisco UCS Manager PowerShell module to submit automated requests to Cisco UCS Manager The engineer must automate the removal of switches from VLANs Environment variadlos must provido the VLAN name and switch identifiers. The VLAN must persist when it is removed from tho switch port Which command must the engineer include in the script to accomplish these goals?

An engineer configures a storage environment for a customer with high- security standards. The secure environment is configured in vsan 50. The customer wants to maintain a configuration and active databases and prevent unauthorized switches from joining the fabric. Additionally, the switches must prevent rogue devices from connecting to their ports by automatically learning the WWPNs of the ports connected to them for the first time. Which two configuration sets must be used to meet these requirements? (Chose two.)

Refer to the exhibit.

A network engineer must create a new tenant within a Cisco ACI fabric. Which HTTP method must be used?

Refer to the exhibit.

A Cisco VXLAN data center is deployed using Cisco Nexus 9000 Series Switches. The deployment must meet the following requirements:

VTEP1 must learn the MAC addresses of User1 and User2 on interfaces Ethernet1/1 and Ethernet1/2.

VTEP2 must never age out the MAC address of the web server.

MAC addresses learned on VTEP1 interfaces must persist after the device or interfaces restart.

Which configuration accomplishes these goals?

Refer to the exhibit. An engineer uses Python in Cisco NX-OS guest shell to retrieve the configuration of the EIGRP ASN on interface eth1/1. The engineer has written this script:

Which command set must be used to retrieve the value of the “asn” key?

Refer to the exhibit.

An engineer must activate the port-security database on a Cisco MDS 9000 Series Switch for VSAN 100, but receives the error shown. Which command completes the

configuration?

Refer to the exhibit. VLAN 10 Is experiencing delays and packet drops when the traffic is forwarded through the switch. The destination flow analyzer accepts traffic captures of not more than 30 seconds. Which configuration implements the traffic capture that meets the requirements?

An engineer must implement a VXLAN-based data center Interconnect. The long-distance transport provided by a service provider is IP-based, supports a maximum MTU of 1554 bytes, and does not support outbound traffic replication. Which action must be taken to build the data center Interconnect?