1Y0-301 Practice Exam Questions with Answers Deploying Citrix XenDesktop 7.6 Solutions Certification

Which two settings could a Citrix Engineer configure on NetScaler Gateway to ensure that connections are utilizing ICA Proxy? (Choose two.)

Which type of XenServer storage repository supports thin provisioning?

What is required to enable session pre-launch and session lingering?

Scenario: A Citrix Engineer at CCH needs to create a StoreFront store. The new store must support authentication and must be accessible through NetScaler Gateway. Users should be allowed to access resources from the store by logging in with their usernames and passwords or through pass-through authentication from NetScaler Gateway. All Active Directory users should be able to access the store from remote locations outside of the corporate network. The secure access plug-in will NOT be used in this environment. VPN tunnel should be disabled.

Tasks:

1. Create a new store named External Store.

2. Enter CCH for the display name of the new store.

3. Add controller-1, controller-2, controller-3 and controller-4 to the new store.

4. Communication with the controllers should take place over port 8080 using HTTP as the transport type.

5. Configure remote access to the StoreFront store through NetScaler.

6. Implement authentication as described in the scenario.

Scenario: A Citrix Engineer must provide students in the Cardiology program at CCH with Windows 8 virtual desktops. These students will use hosted applications through Receiver. Personalization of the Windows 8 virtual desktops is NOT required.

Tasks:

1. Create the appropriate machine catalog and name it XD_POOLED 1.

2. Create 10 virtual desktops for students in the Cardiology program.

3. Ensure each virtual desktop is assigned 2 Virtual CPUs.

4. Set the memory size for the virtual desktops to 8 GB.

5. Use the Network 0 network interface card.

6. Create Active Directory computer accounts for the virtual desktops in the CCH Virtual Desktops organizational unit (OU).

7. Use the following account naming scheme for the virtual desktops: TrainingDesk001 – TrainingDesk010.

8. Create the virtual desktops from the WDK_8_1 master image.

9. Create the appropriate Delivery Group named CCH_Training_Desktops, and configure it according to the requirements above. Students in the Cardiology program are members of the Training Desktops user group.

Scenario: Provisioning Services has been installed to facilitate the deployment of server OS and desktop OS machines. Currently, a pool of Windows 8 desktop OS machines is being used by the Imaging and Radiology team. A virtual machine OU named CCH Virtual Desktops has been created. However, users on the Imaging and Radiology team need to use their medical imaging applications that CANNOT be installed on their workstations due to insufficient resources.

As the Citrix Engineer, you have been asked to provision desktop OS machines with sufficient resources to three Imaging and Radiology team members in order to allow them to use their new applications. All three of the desktop OS machines should be assigned the Win8 vDisk, and the desktop OS machines should maintain changes after reboot. Members of the Imaging and Radiology team need to be able to log into the CCH.com domain.

The Windows 8 virtual machines were already created with the following information:

• CCHWin801 - IR Desktop 1

CCHWin802 - IR Desktop 2

• IP Address: DHCP Assigned
• MAC Address: 56:5b:b0:38:6a:54
• NOT a member of Active Directory

CCHWin803 - IR Desktop 3

• IP Address: DHCP Assigned
• MAC Address: be:c8:96:6e:89:c9
• NOT a member of Active Directory

In order to save time, a copy of an existing Window 8 base image vDisk was created and named Win8 and is stored in the PVS StoreOI store.

As the Citrix Engineer, use the existing site, store, and device collection to implement the tasks below.

Tasks:

1. Create and configure all 3 of the Windows 8 desktop OS machines as target devices to boot using the Win8 vDisk.

2. Name the target devices CCHWin801, CCHWin802, and CCHWin803.

3. Modify the vDisk as necessary to meet the requirements outlined in the scenario.

Scenario: A Citrix Engineer at CCH needs to provide owners of a specific application with delegated administrative rights to perform specific tasks on their application and the servers hosting their application.

The application owners need permissions to do the following:

• Add and remove the application from a Delivery Group
• Create and delete applications
• Edit application properties
• Add and remove the application from Maintenance Mode
• Perform power operations on Windows Server machines

Permissions should be specifically granted to the CCH\MedAppAdmins group and assigned to a custom scope.

Tasks:

1. Create a custom role named MedAppAdmins.

2. Assign only the required permissions to the newly created role.

3. Create a custom scope named MedAppScope for the application owners' delivery group.

4. Assign this role to the CCH\MedAppAdmins group.

5. Assign this group to the newly created scope: MedAppScope.

While testing a Delivery Group prior to roll out, a Citrix Engineer notes that closing an application and then launching another takes as long as the first logon of the day.

What could a Citrix Engineer configure to shorten the launch time of subsequent applications?

A Citrix Engineer notices that session lingering is NOT working as expected during periods of high use.

What is the likely cause of this issue?

The database for a XenDesktop environment is offline, but the users in the environment are still able to launch sessions.

How are the users still able to launch sessions?

During the testing of a NetScaler high availability setup where two-factor authentication has been verified, new user connections are failing due to authentication issues.

What should a Citrix Engineer do to resolve this issue?