Crack4sure Logo
Refer to the exhibit.
In an EMC NetWorker environment, the storage node sn1 is down for maintenance. According to the client properties, what happens when the backup of the client starts?
What EMC NetWorker command is used to display a list of labeled volumes in the NetWorker media database?
Which command can be used to recover an EMC NetWorker Management Console database?
An EMC NetWorker storage node has two advanced file type devices that stage the data to two physical LTO-4 drives. Due to a hardware issue, the administrator has put one of the LTO-4 drives in Service mode.
How many nsrmmd processes are now running on the EMC NetWorker storage node?
During the configuration of a tape library attached to a remote EMC NetWorker storage node, an "Access denied" error message is reported. What is the root cause of the issue?
You are using NetWorker Management Console (NMC) to manage an EMC NetWorker server. You want to add a second data zone to your environment and monitor this data zone using the existing NMC. How can this be done?
In an EMC NetWorker environment, what is the default retention period for information about completed backups that is contained in the Management Console Database?
An EMC NetWorker customer has an autochanger with four LTO-3 tape drives. All four drives are configured to a NetWorker server. Two drives are dynamically shared with a NetWorker storage node. One of the shared drives suffers a mechanical failure and is disabled.
How many nsrmmd processes need to be running on the NetWorker server?
Which EMC NetWorker software component is responsible for storing metadata in the form of hash IDs for a deduplication backup?
When creating an EMC NetWorker application-based snapshot, in what order are the steps performed?
You are installing a new EMC NetWorker server and would like alerts to be sent automatically to EMC Support. What additional component needs to be included as part of this installation?
Click the Calculator icon in the upper left-hand corner.
In an EMC NetWorker environment, the customer is backing up 500 GB per day. The 500 GB is comprised of 35,000 very large files. According to EMC best practices, approximately how large will the Client File Index (CFI) be?
A customer is running an EMC NetWorker 7.6 server on a UNIX platform and wants to monitor backup operations from the command line.
Which utility can be used?
If an incremental backup is performed for an EMC NetWorker client, at what level is its Client File Index (CFI) backed up?
An EMC NetWorker storage node has two advanced file type devices that stage the data to two physical LTO-4 drives. Due to a hardware issue, the administrator has disabled one of the LTO-4 drives.
How many nsrmmd processes are now running on the EMC NetWorker storage node?
In an EMC NetWorker environment, which factor needs to be tuned to balance the performance between backups and restores?
A backup administrator wants to exclude all user temp directories during backups. How can this be implemented using EMC NetWorker?
Refer to the exhibit.
An EMC NetWorker customer has two data zones, A and B, with autochanger AC1 and AC2, respectively, with four drives each. AC1 is configured as a dedicated autochanger and AC2 is configured as a shared autochanger. Two drives of AC2 are statically assigned. How many drives of AC2 can be shared in Zone A?
An EMC NetWorker server has two user defined pools, Pool A and Pool B. Pool A has its "Clients" attribute set to "Client A" while the other attributes are unset. Pool B has its "Groups" attribute set to "sales" and "Levels" attribute set to "full" and other attributes unset.
If a save set is generated from Client A from the "sales" group using a full level backup, which pool will the data be sent to?
Refer to the exhibit.
In the NMM backup workflow, which process is shown in the box marked "A"?
An administrator experienced a power failure in their data center. After checking their Dell EMC NetWorker servers, the administrator discovered an error message on one of the NetWorker server. The message indicates that the media database does not exist.
What is the recommended way to resolve any corruption in the database?
A Dell EMC NetWorker backup administrator wants to identify bottlenecks for a file server with poor backup performance. The administrator discovers that Client Direct is disabled for the file server.
What happens when Client Direct is enabled?
A backup administrator manages a server environment consisting of servers running many different operating systems. The administrator wants to deploy Dell EMC NetWorker to back up this environment.
On which server OS can the NetWorker server be installed?
A customer has recently purchased a Data Domain appliance to use with EMC NetWorker as the primary storage. The backup administrator needs to configure EMC NetWorker so that multiple backups and recoveries can be performed from a single device at any given time. What type of device should the backup administrator configure?
In a Dell EMC NetWorker datazone, what is a benefit of integrating the Data Domain Cloud Tier?
What EMC NetWorker software component controls the backup device in an EMC NetWorker Data Zone?
You need to integrate snapshot technology on SAP backups in an EMC NetWorker environment. Which module is required?
An EMC NetWorker backup client contains 650 GB of data in 750,000 files and is presently being backed up by an EMC NetWorker server-to-storage node with six tape drives connected via Fibre Channel. Analysis has determined that the storage node and SAN connections to the tape drive are not impacting performance. What is the recommended method for backing up this client?
Which combination of simultaneous backups and recoveries is supported when using an advanced file type device in EMC NetWorker?
A Dell EMC NetWorker backup administrator is deciding between guest-level backups versus NetWorker VMware Protection. What are the advantages of using NetWorker VMware Protection?
What application does the Enhanced Server Recovery option in EMC NetWorker allow us to interact with?
An EMC NetWorker Administrator wants to start all of the EMC NetWorker processes on a Solaris server.
Which command would run?
What is the default port number for the Dell EMC NetWorker server to authenticate the NMC server host?
You are logged in to your Windows-based EMC NetWorker server and are attempting to manually run a backup group on the EMC NetWorker Management Console. You are receiving an error when attempting to manually start the group.
What is the most likely reason for the error?
After initiating a manual save, you receive the following error message:
39078:savE. SYSTEM error: manual saves are not enabled
What must you check to do a manual save?
An EMC NetWorker administrator wants to determine the RPC port range for a host.
Which directory contains this information?
By default, the EMC NetWorker bootstrap reports are generated and sent automatically to the backup administrator. Which configuration change is required to redirect the reports to the printer?
An EMC NetWorker administrator has two LTO-4 tape drives configured on an EMC NetWorker server. One of the two tape drives is dynamically shared with an EMC NetWorker storage node. The other tape drive is statically assigned to the EMC NetWorker server. The shared drive stops functioning on the EMC NetWorker server but continues to function on the storage node.
How many nsrmmd are now running on the storage node?
An EMC NetWorker server has been configured to stage an adv_file type device upon reaching a high water mark of 80%. After the staging begins, what rule determines when the staging process ends?
What is the selection hierarchy used in determining to which EMC NetWorker pool data is sent?
An EMC NetWorker administrator wants to perform backup of an application server only if a certain number of transaction logs have been reached.
What type of backup needs to be performed?
A Dell EMC NetWorker administrator has a requirement for a CloudBoost solution that provides the following:
- Fast restore from local cache copies using site cache
- Low-cost cloud object storage for all backup copies
- Deduplication, encryption, and compression before transfer to the cloud
Which CloudBoost use case meets these requirements?
TESTED 13 Jan 2025