Black Friday Flash Blitz - 75% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: 75special

Practice Free 301a BIG-IP LTM Specialist: Architect, Setup, and Deploy (301a) Exam Questions Answers With Explanation

We at Crack4sure are committed to giving students who are preparing for the F5 301a Exam the most current and reliable questions . To help people study, we've made some of our BIG-IP LTM Specialist: Architect, Setup, and Deploy (301a) exam materials available for free to everyone. You can take the Free 301a Practice Test as many times as you want. The answers to the practice questions are given, and each answer is explained.

Question # 6

Connection mirroring performance impact

An LTM Specialist plans to enable connection mirroring for a virtual server in an HA environment. What must be considered before implementing the configuration change? (Choose one answer.)

A.

The add-on licence required for this feature

B.

Decreased number of possible concurrent connections

C.

Impact on system performance that might be noticeable

D.

Creating the required separate interface for connection mirroring

Question # 7

Refer to the exhibit.

301a question answer

The pool shown is configured with four pool members in a variety of states. The application is receiving a large number of request. The LTM Specialist needs to make changes to make sure that all members receive the same levels of traffic.

Which changes need to be made?

A.

Enable 10.80.1.40 disable priority group activation, enable ratio

B.

Enable 10.80.1.40 and 10.80.1.1.20 disable group activation, enable Round Robin

C.

Enable 10.80.1.20 disable priority group activation, enable Round Robin

D.

Enable 10.80.1.40 and 10.80.1.20 disable priority group activation, enable ratio.

Question # 8

An LTM Specialist is the administrator of an HA pair that contains two BIG-IP units and one floating traffic group (TG1). A new project requires the creation of 30 virtual servers. The Specialist decides to create a new floating traffic group (TG2) to handle this requirement. Objects for this project created by the BIG-IP Managers must appears in the correct traffic group.

Which configuration should the LTM Specialist use to meet the requirement?

A.

Move the BIG-IP Managers from TG1 to TG2

B.

Create a new partition and set the default traffic group to TG2

C.

Modify the default traffic group of the Common partition to TG2

D.

Restrict the Traffic Group Access of BIG-I Managers to TG2

Question # 9

Normal HTTP monitor receive 200

Consider the following monitor configuration: ltm monitor http MyHTTP_Monitor { defaults-from http destination * interval 5 recv " 200 OK " reverse disabled send " GET /\r\n " time-until-up 0 timeout 16 }. What is the status of a pool member that responds with " 200 OK " ? (Choose one answer.)

A.

Available

B.

Disabled

C.

Down

D.

Unknown

Question # 10

TWO BIG-IP appliances need to be configured to load balance multiple firewall in a firewall sandwich,

Which health monitor setting should be used to verify that the firewalls are able to forward traffic?

A.

Adaptive

B.

Reverse

C.

Transparent

D.

Up internal

Sandwich architect firewalls are generally deployed transparently. You can enable Transparent to point to the next-hop address of the firewall and associate it with the firewall pool member for detection.

Question # 11

SFTP TCP with shared storage

Traffic to a pool of SFTP servers that share storage must be balanced by an LTM device. What profiles and persistence settings are required for a Standard virtual server? (Choose one answer.)

A.

TCP; no persistence profile will be used

B.

TCP, FTP; Source Address persistence

C.

TCP, Client SSL, FTP; server-side persistence

D.

TCP, Client SSL, Server SSL; persistence

Question # 12

An LTM Specialist is experiencing issues in a failover event. Certain long-lasting FTP event. Certain long-lasting FTP connections using a single node pool are forced to reconnect. The bigip.conf extract is shown:

301a question answer

What does the LTM Specialist need to change in the configuration to avoid this issue?

A.

snatpool

B.

persistence mirroring

C.

connection mirroring

D.

ftp profile

Question # 13

An LTM Specialist needs to create two virtual servers.

The application has links for both HTTP and HTTPS version of application. The client must be persistence to a pool member, no matter which virtual server is accessed.

What must be selected in the Source Address Affinity persistence profile?

A.

Match across Virtual Servers

B.

Match across Pool Members

C.

Match across Services

D.

Match across Polls

Question # 14

To improve application security, an LTM Specialist must configure a BIG application access. The BIG-IP system to authenticate the client certificate before permitting application access. The BIG-IP system must also support the ability to red to redirect users to a certificate enrolment system without generating a browser error.

Within the Client SSL profile, which value should the LTM Specialist select for the Client Certificate option?

A.

Require

B.

Request

C.

Demand

D.

ignore

Question # 15

An LTM specialist needs to upgrade a VCMP quest in an HA Setup with minimum interruption for all VCMP guest instances.

In which should the LTM Specialist perform this upgrade?

A.

Relicense the host. Failover all guest’s active traffic-groups to the other host, copy image to gest, create guest UCS install and set boot location to new volume, reboot

B.

Failover this specific guest’s active traffic-group to the other Host, Relicense the guest, copy image to guest , create guest UCS, install and set boot location to new volume, reboot

C.

Failover all guests’ active traffic-group to the other Host, Relicense the host, copy image to guest, create guest UCS, install and set boot location to new volume , reboot

D.

Failover all guests’ active traffic-group to the other host, copy image to guest, create guest UCS install and set boot location to new volume, reboot, Relicense the host

Switch guest, reactive, license first and then upgrade.

Question # 16

An LTM Specialist to configure a backend server to be disabled it takes longer than 30 seconds to respond to a request.

Which values should the LTM Specialist enter for interval and timeout?

A.

Interval 10, timeout 30

B.

Interval 10, timeout 31

C.

Interval 30, timeout 30

D.

Interval 30, timeout 91

The official recommendation is that timeout 3 times the interval value +1.

Question # 17

SFTP TCP with no persistence

Traffic to a pool of SFTP servers that share storage must be balanced by an LTM device. What are the required profiles and persistence settings for a Standard virtual server? (Choose one answer.)

A.

TCP; no persistence profile is used

B.

TCP, FTP; Source Address persistence

C.

TCP, Client SSL, FTP; server-side persistence

D.

TCP, Client SSL, Server SSL; persistence

Question # 18

An LTM Specialist needs to add a pool that will load balance MYSOL services. It has four members, each with differing hardware platforms. All pool members are already assigned to another pool for load balancing FTP traffic.

Which load balancing method is most effective when the LTM Specialist sets up the pool?

A.

Observed (node)

B.

Predictive member)

C.

Round Robin

D.

Least Connections (node)

Question # 19

One LTM device in an HA pair of LTM devices is unable to reach its default gateway. An HA Failover event needs to happen.

Which configuration item enables this behavior?

A.

iRule

B.

Gateway Fail Safe

C.

Gateway pool monitor

D.

Gateway pool

Question # 20

Two LTM devices must be manually configured to restrict in the same Device Group.

What is the correct order of steps to meet this requirement?

A.

Configure VLAN, Configure-Sync IP, Configure Failover type, Establish Device Trust, Sync Device Trust, Create type, Establish Device Sync Device Trust, Create Device Group.

B.

Configure VLAN, Configure Self-IPs, Configure Config-Sync IP. Configure Failover type, Establish Device Trust, Sync Device Trust, Create Device Group.

C.

Configure Self-IPs, Configure VLAN, Configure Config-Sync IP. Configure Failover type, Establish Device Trust, Sync Device Trust, Create Device Group

D.

Configure VLAN, Configure Config-Sync IP. Configure Self-IPs. Configure Failover type. Establish Device Trust, Create Device Group

Question # 21

Forward original client IP through HTTP

An existing service has been deployed on a BIG-IP LTM device and is functioning as expected. A new request requires the client IP address to be forwarded to the backend service. Which profile is required for this functionality? (Choose one answer.)

A.

OneConnect Profile

B.

Source Address Translation

C.

SSL Profile (Server)

D.

HTTP Profile

Question # 22

A company plans to launch a huge marketing campaign and expects increase demand of their secure website. With the current virtual server setup, the LTM Specialist expects that the LTM device will reach its capacity limits. For the wen application to function properly. Cookies persistence is required. The LTM Specialist needs to reduce LTM device load without breaking the application.

Which two settings should the LTM Specialist modify to meet the requirement? (Choose two.)

A.

Remove HTTP compression profile

B.

Remove HTTP profile

C.

Remove web acceleration profile.

D.

Modify virtual Server type to performance (Layer 4)

E.

Remove ClientSSL profile

It is required that cookie persist must be used and http profile must be used, and SSL offloading must also be required. It must be in standard mode, excluding BD E.

Question # 23

An LTM device load balances a pool of routers. The LTM device needs to verify path availability to an HTTP server with the IP address 192 168.10 10. located beyond the routers.

Which monitor type and parameters arc required?

A.

HTTP monitor alias address 192 168.10 10. and set the alias to port 80

B.

TCP monitor, alias address 192.168.10.10. and set the alias to port 80

C.

TCP monitor change transparent option to Yes. set alias address 192.168.10.10. and set the alias to port 80

D.

TCP monitor, change transparent option to Yes, and sot the alias to port 80

Question # 24

A pool has four members. Ail of the servers have been designed and configured with the same application. Each client ' s request can significantly the performance of the servers.

Which load balancing method should the LTM Specialist use to maintain a relatively even load across all servers?

A.

Least Connections

B.

Priority Group

C.

Ratio

D.

Observed

Question # 25

Active/passive FTP single virtual server

An LTM device needs to load balance active and passive FTP traffic while using a single virtual server. Which virtual server type should the LTM Specialist configure? (Choose one answer.)

A.

Forwarding (Layer 2)

B.

Stateless

C.

Forwarding (IP)

D.

Standard

E.

DHCP Relay

Question # 26

An organization’s development team creates an application to put behind the BIG-IP LTM device. The application can be quite load intensive at first, and then evens out over time. The team’s load balancing method needs to select a pool after taking into account the pool member’s response over the time to avoid landing on a busy pool member.

Which of the following load balancing methods meets this requirement?

A.

Fastest (application)

B.

Predictive (member)

C.

Dynamic (node)

D.

Observed (member)

Question # 27

RDP delay with Nagle enabled

Users indicate poor performance on RDP connections. The servers have been checked and show no sign of offload issues. Which profile setting might cause poor RDP application performance? (Choose one answer.)

A.

Nagle algorithm enabled in the HTTP profile

B.

Nagle algorithm disabled in the TCP profile

C.

Nagle algorithm disabled in the HTTP profile

D.

Nagle algorithm enabled in the TCP profile

Question # 28

An application is making heavy use of a large, high-quality JPEG image file. An LTM Specialist needs to enhance page load times without increasing server load.

Which profile should be applied to the virtual server to perform this task?

A.

Response Adapt

B.

OneConnect

C.

FastHTTP

D.

Web Acceleration

Question # 29

An LTM Specialist needs to create a pool with a set of monitor that checks both the pool members and corresponding application service ports. The pool members have services on port 80. The application service is on port 8009.

The LTM device should load balance traffic to the pool member when the pool member and corresponding application service pass monitor.

Which monitor and parameter set meets this requirement?

A.

TCP monitor for port*

Plus a custom TCP monitor with alias port 8009,

And the pool’s availability requirements set to the ALL

B.

TCP monitor for port

Plus a ustom TCP monitor with alias port 8009,

And the pool’s availability requirement set to All

C.

TCP monitor for port*

Plus a custom TCP monitor with alias port 8009

And the pool ‘s availability requirement set to 1.

D.

TCP monitor for port

Plus a custom TCP monitor with alias port 80

And the pool’s availability requirement set to ALL

Question # 30

An LTM device configured with a management IP address and route and a series of self-IPs and TMM routes. Both management and TMM have a routing entry for 101 10/24 Application traffic is being load balanced and sent to pool member 10.1.1.123 with SNAT Automap and configured.

Which route will the LTM device use?

A.

TMM route regardless of the management port status

B.

both routes, which will duplicate traffic on both management and TMM interface

C.

equal cost multipath load balancing via both routes

D.

management route when TMM interface is down or TMM is offline

E.

management route regardless of the management port status

Question # 31

A Client makes the request displayed below to the application server.

Which virtual server type should an LTM Specialist use to load balance based on the URI?

A.

Forwarding (Layer 2)

B.

Stateless

C.

Standard

D.

Performance (Layer 4)

Question # 32

A node is assigned two monitors as seen in this configuration.

301a question answer

What is the status of a member that runs on that node and listens on port 443?

A.

UNKNOWN

B.

UNAVAILABLE

C.

DOWN

D.

UP

Question # 33

An LTM Specialist plans to enable connection mirroring for a virtual server in an HA environment.

What must the LTM Specialist consider before implementing the configuration change?

A.

Impact on system performance that might be noticeable

B.

The add-on license that is required for this feature to be available

C.

Creating the required separate interface for connection mirroring

D.

Decreased number of possible concurrent connections to that virtual server

Connection mirroring will bring performance consumption

Question # 34

An LI M device is experiencing a high volume of traffic. The virtual server is struggling under the load. The problem appears to be on the server side connections. The virtual server is accepting connections . The virtual server is accepting connections on https and is configured with an SSL profile and http pool.

What should be added to increase the performance of the device?

A.

an HTTP Compression profile

B.

a One Connect profile

C.

smaller key to the SSL profile

D.

a SPDY profile

Question # 35

AN LTM Specialist must upgrade the VCMP Guest active/standby LTM pair from version 11.3 to 11.5.3 on two VCMP Hosts.

where should the LTM Specialist import the latest 11.5.3 ISO images?

A.

to the primary VCMP Host and the active Guest instance

B.

to both VCMP Hosts

C.

to the secondary vCMP Host and the standby Guest instance

D.

to the VCMP Guest instances

Question # 36

An application is sensitive to packet loss and unexpected session termination. A pair of LTM devices is configured in an Active/Standby high availability configuration. SNATS are NOT used and the virtual server contains a Universal Persistence profile.

which two actions must an LTM Specialist take to ensure the sessions are maintained between the client and server during an LTM device failover event while maintaining maximum uptime? (Choose two.)

A.

configure a serial failover cable for mirror traffic

B.

configure a OneConnect profile to mirror connections

C.

configure a VLAN and primary mirroring address for mirror traffic

D.

enable Mirroring for a virtual server and persistence profile

E.

enable Clone Pools for a virtual server and a persistence profile

Question # 37

in which Application Visibility and Reporting (AVR) profile must the SMTP profile be defined to configure notifications via email?

A.

App analytics profile

B.

virtual server profile

C.

custom analytics profile

D.

default analytics profile

Question # 38

HA state flapping over high-latency link

Two LTM devices are in the same Device Group and configured for Active/Standby Failover. The LTM Specialist observes that the HA Active and Standby devices constantly change state. All networks use the default route domain. A dedicated fiber link is used for HA communication with a latency of 250 ms but no packet loss. What is causing the change in failover state to occur? (Choose one answer.)

A.

The HA network is using the default routing domain

B.

The HA network is not configured for mirroring

C.

The HA network latency is too high

D.

The HA network is using multicast IP

Question # 39

Geolocation iRule on SSL website

An LTM Specialist deploys an iRule designed to determine the country of origin of an incoming client connection. The iRule is used with an SSL-enabled web application. Which profile is required for the iRule to function properly? (Choose one answer.)

A.

DNS

B.

TCP

C.

UDP

D.

HTTP

Question # 40

Outbound SNAT pool of addresses

An LTM Specialist needs to use a set of addresses to access an Internet website in an outbound configuration. Which feature should be configured? (Choose one answer.)

A.

NAT address

B.

SNAT pool

C.

SNAT address

D.

NAT pool

Question # 41

RADIUS authentication has been configured on the LTM device. The default remote user access requirements are as shown:

Read only access to the configuration Utility

Access to TMOS shell

Which two items need to be configured in this situation? (Choose two)

A.

Console access is Advanced Shell

B.

Console access is Read Only

C.

Default remote user role is Guest

D.

In Console access is TMSH

E.

Default remote user role is Manager

F.

Default remote user role is Operator

Question # 42

nPath virtual server direct return

An LTM Specialist creates the virtual server for nPath routing on port 80, but it fails to work as expected. The configuration is: ltm virtual npath { destination 192.168.153.200:http mask 255.255.255.255 profiles { fastl4-looseclose { } } source 0.0.0.0/0 translate-address disabled translate-port disabled vs-index 3 }. Which TMSH command should the LTM Specialist use to fix this issue? (Choose one answer.)

A.

modify ltm virtual npath profiles add { http }

B.

modify ltm virtual npath source-port preserve-strict

C.

modify ltm virtual npath source-address-translation { type automap }

D.

modify ltm virtual npath auto-lasthop disabled

Question # 43

A virtual server is configured to handle https traffic. The clientssl profile is configured to use a 2048-bit RSA key. Due to security requirements, is the LTM Specialist needs to use a 4096-bit RSA key in the future.

What two effects will this change have on the BIG-IP device? (Choose two)

A.

Increase of CPU usage on the BIG-IP device

B.

Decrease to 20% of licensed TPS

C.

Decrease to 90% of licensed TPS

D.

Increased of concurrent connection on client-side

E.

Increase of TLS Renegotiation

Question # 44

Increase vCMP guest cores per slot

An LTM Specialist needs to increase the number of CPUs for a vCMP guest. Which TMSH command accomplishes the task? (Choose one answer.)

301a question answer

A.

`modify vcmp guest vcmp-guest1 state provisioned; list vcmp guest vcmp-guest1 cores-per-slot 4; save sys config`

B.

`modify vcmp guest vcmp-guest1 cores-per-slot 4; list vcmp guest vcmp-guest1 cores-per-slot; save sys config`

C.

`modify vcmp guest vcmp-guest1 state deployed; modify vcmp guest vcmp-guest1 cores-per-slot 4; save sys config`

D.

`modify vcmp guest vcmp-guest1 state configured; modify vcmp guest vcmp-guest1 cores-per-slot 4; save sys config`

Question # 45

An LTM device provides load balancing to a web application? The LTM device has two dual-core processors and a licensed SSL Transactions Per Second (TPS) limit of 500 CMP is enabled.

TLS connections are used between client systems and virtual servers on the LTM device, as well as from the LTM device to servers used as part of LTM pool.

TLS enabled virtual servers utilize certificates based on 2048-bit keys

During a peak period. 2560 new TLS transactions per second are attempted to the web application via the LTM device.

What will happen in this scenario?

A.

560 new TLS transactions will be silently discarded due to the SSL TPS license limit

B.

Nothing: TLS transactions per second are NOT affected by an SSL TPS license limit

C.

2060 new TLS transactions will be silently discarded due to the SSL TPS license limit

D.

Nothing: 2560 TLS transactions per second is within the SSI TPS license limit.

Question # 46

An LTM Specialist is removing some of the load off an existing cluster by adding a adding a third BIG-IP

device to the device group. The new device can deliver twice the performance of the other two devices.

The LTM Specialist needs to make sure that the BIG-IP device with the highest available capacity is

always selected to take over a traffic group in the event of a failover.

Which failover method is most appropriate?

A.

Ordered List

B.

Load Aware

C.

HA Group

D.

HA Capacity

Question # 47

An LTM Specialist decides to offload SSL traffic on the LTM device instead of just passing it through. The LTM Specialist needs to change the configure from a Performance (Layer 40 virtual server to a Standard virtual server with SSL offload.

Which two element the LTM Specialist consider when performance this task? (Choose two.)

A.

CPU load

B.

Sensitive connections

C.

Port exhaustion

D.

Memory load

E.

Connection mirroring

Question # 48

Reusable iApp template for repeated deployment

For what purpose should an LTM Specialist create an iApp template? (Choose one answer.)

A.

For a customized, consistent configuration that will be deployed multiple times

B.

For a configuration that restricts editing to a specific group of people

C.

For a configuration that serves traffic only for a specific group of people

D.

For a customized configuration that will only be deployed for a specific service

Question # 49

TWO LTM devices are in the same Device Group and configured for Ac live/Standby Failover. The LTM Specialist observes that the HA Active and Standby device constantly changes state. All network links use the default route domain A dedicated fiber ink is used for the HA connection with a latency of 250 ms but no packet loss.

301a question answer

What is causing the change in failover state to occur?

A.

The HA network is using the default routing domain.

B.

The HA network is using multicast IP.

C.

The HA network is not configured for mirroring.

D.

The HA network latency is too high.

Question # 50

Where does a LTM Specialist view all of the objects that are part of a deployed iApp?

A.

iAPP > Application Policy > Objects

B.

Local Traffic . Virtual Servers > Applications

C.

IAP > Application Service > Components

D.

Local Traffic > Network Map > View Map

Question # 51

SNAT pool of four addresses for 100K connections

An application is expected to maintain more than 100,000 concurrent TCP connections to a single pool member. What is an appropriate SNAT configuration in this situation? (Choose one answer.)

A.

SNAT Automap enabled

B.

A SNAT pool with 4 IP addresses

C.

A SNAT pool with 1 IP address

D.

A static SNAT

Question # 52

Exhibit.

301a question answer

The server team has recently configured the three new DNS servers shown for the data center. No current DNS servers are currently configured on the LTM device.

Which command should be used to configure the LTM device to use the new DNS servers?

A.

tmsh create/systins name-servers add {192 168.1.2.192.168.100.1O0.192.168.2O0.2OO}

B.

tmsh change /sysdns name-servers add {192.168.1.2.192.168.100.100.192.168.200.200}

C.

tmsh modify/sysdns name-servers add {192.168.1.2.192.168.100.100.192.168.200.200}

D.

tmsh set/sysdns name-servers add {192.168.2.192.168.100.100.192.168.200.200}

Modify the configuration with modify, and create the configuration with create. Excluding B and D, and the question is to modify the DNS pointer of E5 itself the need to use is modify.

Question # 53

What should an LTM Specialist configure on an LTM device to send AVR notification emails?

A.

Email notification to be sent via iControl from the LTM device

B.

Syslog on the LTM device to send to an SMTP server

C.

Custom SNMP traps on the LTM device for AVR notifications

D.

Email notification to be sent via SMTP from the LTM device

Question # 54

Node with ICMP and TCP monitors

A node is assigned two monitors. A packet capture shows ICMP echo requests and replies with 10.128.20.12, an HTTP TCP connection receiving a reset, and an HTTPS TCP connection that successfully establishes to 10.128.20.12:443. What is the status of a pool member running on that node and listening on port 443? (Choose one answer.)

A.

Unavailable

B.

Up

C.

Unknown

D.

Down

Question # 55

SNAT for 65,000 concurrent connections

An LTM Specialist needs to apply SNAT to a virtual server that processes 65,000 concurrent connections. What should the LTM Specialist do? (Choose one answer.)

A.

Disable address translation

B.

Configure a new SNAT pool

C.

Disable port translation

D.

Configure SNAT Automap

Question # 56

An LTM Specialist upgrades the switching infrastructure and the backend servers on the LAN segments.

The LTM Specialist notices a 20% memory usage increase on the BIG-IP device while handling the same number of concurrent connections.

A comparison of statistics pre-upgrade and post-upgrade shows a significant reduction on the following:

-RTT between the BIG-IP device and the backend servers

-Packet drops in the switch

Time to First Byte (TTFB)

The LTM Specialist is concerned with the scalability of the number of concurrent connections with the new memory usage.

Which setting should be changed to reduce the memory usage on the BIG-IP device?

A.

Reduce the proxy buffer high setting on the server-side TCP profile

B.

Increase the receive window of the client-side TCP profile

C.

Increase the proxy buffer high setting on the server-side TCP profile

D.

Reduce the idle of the client-side TCP profile

Explanation

After adjusting the architecture, the network quality becomes better. With the connection unchanged the memory usage increase by 20%. It means that the sending speed of the server is higher than the receiving speed of the client. F5 caches more content on the memory and causes the memory usage to….

301a PDF

$27.5

$109.99

3 Months Free Update

  • Printable Format
  • Value of Money
  • 100% Pass Assurance
  • Verified Answers
  • Researched by Industry Experts
  • Based on Real Exams Scenarios
  • 100% Real Questions

301a PDF + Testing Engine

$44

$175.99

3 Months Free Update

  • Exam Name: BIG-IP LTM Specialist: Architect, Setup, and Deploy (301a)
  • Last Update: Nov 22, 2026
  • Questions and Answers: 189
  • Free Real Questions Demo
  • Recommended by Industry Experts
  • Best Economical Package
  • Immediate Access

301a Engine

$33

$131.99

3 Months Free Update

  • Best Testing Engine
  • One Click installation
  • Recommended by Teachers
  • Easy to use
  • 3 Modes of Learning
  • State of Art Technology
  • 100% Real Questions included