Get GSNA Dumps : Verified GIAC Systems and Network Auditor

Both hardening the server OS and using strong password policies on workstations are good ideas, but neither has anything to do with securing your wireless connection. Answer: B is incorrect. Using WEP or WPA is one of the most basic security steps in securing your wireless.

A user can use some countermeasures to prevent WEP cracking. Although WEP is least secure, it should not be used. However, a user can use the following methods to mitigate WEP cracking: Use a non-obvious key. Use the longest key supported by hardware. Change keys often. Use WEP in combination with other security features, such as rapid WEP key rotation and dynamic keying using 802.1x. Consider WEP a deterrent, not a guarantee. Answer: D is incorrect. SSID stands for Service Set Identifier. It is used to identify a wireless network. SSIDs are case sensitive text strings and have a maximum length of 32 characters. All wireless devices on a wireless network must have the same SSID in order to communicate with each other. The SSID on computers and the devices in WLAN can be set manually and automatically. Configuring the same SSID as that of the other Wireless Access Points (WAPs) of other networks will create a conflict. A network administrator often uses a public SSID that is set on the access point. The access point broadcasts SSID to all wireless devices within its range. Some newer wireless access points have the ability to disable the automatic SSID broadcast feature in order to improve network security.

Wired Equivalent Privacy (WEP) is a security protocol for wireless local area networks (WLANs). It has two components, authentication and encryption. It provides security equivalent to wired networks for wireless networks. WEP encrypts data on a wireless network by using a fixed secret key. WEP uses the RC4 encryption algorithm. The main drawback of WEP is that its Initialization Vector (IV) field is only 24 bits long. Many automated tools such as AirSnort are available for discovering WEP keys. Answer: C is incorrect. WPA stands for Wi-Fi Protected Access. It is a wireless security standard. It provides better security than WEP (Wired Equivalent Protection). Windows Vista supports both WPA-PSK and WPA-EAP. Each of these is described as follows: WPA-PSK: PSK stands for Preshared key. This standard is meant for home environment. WPA-PSK requires a user to enter an 8- character to 63-character passphrase into a wireless client. The WPA converts the passphrase into a 256-bit key. WPA-EAP: EAP stands for Extensible Authentication Protocol. This standard relies on a back-end server that runs Remote Authentication Dial-In User Service for user authentication. Note: Windows Vista supports a user to use a smart card to connect to a WPA-EAP protected network.

The PrincipalPermission class allows security checks against the active principal. This is done by using the language constructs that are defined for both imperative and declarative security actions. To perform an imperative security demand for membership in a built-in Microsoft Windows group, you must first set the default principal policy to the Windows principal by calling the SetPrincipalPolicy (PrincipalPolicy.WindowsPrincipal) statement. Construct a PrincipalPermission object specifying the group name. To specify the group name, you can provide just the group name, or you can preface the group name with either "BUILTIN\" or the computer name and a backslash. Finally, call the PrincipalPermission.Demand method. There is another method of identifying group membership, i.e. by using the PrincipalPermission class or the PrincipalPermissionAttribute attribute derived from the System.Security.Permissions namespace. The PrincipalPermission object identifies that the identity of the active principal should match its information with the identity information that is passed to its constructor. The identity information contains the user's identity name and role.

Various authorities have created differing taxonomies to distinguish the various types of IT audits. Goodman & Lawless state that there are three specific systematic approaches to carry out an IT audit: Technological innovation process audit: This audit constructs a risk profile for existing and new projects. The audit will assess the length and depth of the company's experience in its chosen technologies, as well as its presence in relevant markets, the organization of each project, and the structure of the portion of the industry that deals with this project or product, organization and industry structure. Innovative comparison audit: This audit is an analysis of the innovative abilities of the company being audited in comparison to its competitors. This requires examination of company's research and development facilities, as well as its track record in actually producing new products. Technological position audit: This audit reviews the technologies that the business currently has and that it needs to add. Technologies are characterized as being either "base", "key", "pacing", or "emerging". Answer: D is incorrect. These are the audits to verify that controls are in place on the client (computer receiving services), server, and on the network connecting the clients and servers.