HPE6-A70 Practice Exam Questions with Answers Aruba Certified Mobility Associate Exam Certification

Define the Employee and Sales roles as internal roles, and then configure the rules as global rules for internal users.

Apply these rules as a subnet-based policy, and then ensure that only Employee and Sales users are assigned IP addresses in that subnet.

Select either the Employee or Sales role, and then configure these rules within the global policy.

Create a policy with these rules, and then apply that policy to the Employee and Sales roles.

1 channel

3 channels

5 channels

7 channels

the password defined as the preshared key for the WLAN on the Mobility Master (MM) and on authorized wireless clients

the password configured in a user account with administrative rights on the RADIUS server

the password configured for RADIUS clients on the RADIUS server

the password defined for authorized wireless clients on the RADIUS server and also distributed to authorized wireless clients

It checks the compliance posture for Bring Your Own Device (BYOD) endpoints to improve security.

It enables the application of unique CM rules for specific client types.

It checks client behavior against a wider array of rules to detect more DoS attacks and intrusion attempts.

It offloads client load balancing decisions to local controllers.

an IPsec preshared key

CPSec certificates

a portal page

VLAN 99 IP settings

when the MM detects that a different channel has significantly better quality

when the Mobility Controller (MC) detects a rogue AP on the channel

when the AP detects a large amount of interference on its channel

when the Client Match rules indicate that nearby clients do not support the current channel

at the switch

at the AP

at the controller

at the RADIUS server

use of internal captive portal with email registration

addition of custom rules to control access for unauthenticated guests

use of internal captive portal with authentication

redirection of guests to an external captive portal that provides encryption services

ability to gather and analyze historical user data, and monitor client association and network usage trends

scans wireless client settings and brings those settings in compliance with corporate security policies.

ability to monitor and manage a Mobility Controller (MC) to configure the WLAN

provides realtime firewall hits for client network troubleshooting

60

210

900

960

LDAP server

RFC 3576 server

TACACS server

RADIUS server

Run an on-demand quick AirMatch optimization.

Run an on-demand incremental AirMatch optimization.

Temporarily enable ARM on the existing and new APs, while AirMatch scheduling remains enabled.

Temporarily disable AirMatch scheduling, and then enable ARM on the existing and new APs.

The firewall drops the traffic from the wireless client. The firewall drops the traffic from the wired client.

The firewall permits the traffic from the wireless client, but drops the return traffic from the server. The firewall drops the traffic from the wireless client.

The firewall permits the traffic from the wireless client and also permits the return traffic from the server. The firewall permits the traffic from the wired client and also permits the return traffic from the wireless client.

The firewall permits the traffic from the wireless client and also permits the return traffic from the server. The firewall drops the traffic from the wired client.

to support 802.11ac Aps rather than only 802.11n APs

to support more wireless users

to support more POE devices directly connected to the MC

to support a faster firewall throughput rate