Labour Day Special - 65% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: c4sdisc65

Note! HH0-200 has been withdrawn.

HH0-200 Practice Exam Questions with Answers Certified Modular Integration Specialist exam Certification

Question # 6

What is the operational temperature range requirement for a site when installing a Hitachi Thunder 9500V?Series subsystem?

A.

5 to 20 5? to 20?

B.

10 to 40 10? to 40?

C.

15 to 55 15? to 55?

D.

25 to 50 25? to 50?

Full Access
Question # 7

You notice in Hitachi?Resource Manager that one of the LUNs on a RAID group is colored pink. What could be the cause of this problem?

A.

There is a P-VOL failure.

B.

There is a S-VOL failure.

C.

The LUN is under regression.

D.

The command device has failed.

Full Access
Question # 8

What is the correct color coding scheme for ENC cables?

A.

yellow for Path 0 and Milky white for Path 1

B.

milky white for Path 0 and Yellow for Path 1

C.

yellow for Loop 0 and Milky white for Loop 1

D.

milky white for Loop 0 and Yellow for Loop 1

Full Access
Question # 9

What are the two benefits of Data Share mode on a Hitachi Thunder 9500V?Series subsystem in a Dual Active controller configuration? (Choose two.)

A.

It prevents the ping-pong effect of LU ownership change between the two controllers.

B.

It allows access to non-owned LUNs through the controller-to-controller communication paths.

C.

Data Share mode allows the hosts to access data from either of the controllers in case of path failure.

D.

It allows ownership of non-owned LUNs to be transferred through the controller-to-controller communication paths.

Full Access
Question # 10

A customer has received a shipment of a Hitachi Thunder 9570V?Series subsystem. There is one RK and three RKA mounted on a 19?rack. Using the procedure in the Installation Manual, what is the correct combination of the x16 switch and the x1 switch settings to set the unit ID for the third RKA from the bottom?

A.

x16 is set to 0 and x1 is set to 3

B.

x16 is set to 4 and x1 is set to 0

C.

x16 is set to 0 and x1 is set to 4

D.

x1 is set to 3 and x16 is set to 0

Full Access
Question # 11

A customer has LUNs 0 to 25 created and needs to present these LUNs to a HP-UX server. What mode needs to be set on a Hitachi Thunder 9570V?Series subsystem?

A.

HISUP mode

B.

HP Connection Mode

C.

HP Connection Mode 1

D.

HP Connection Mode 2

Full Access
Question # 12

Which three are part of the pre-install checklist when installing and configuring a Hitachi Thunder 9500V?Series subsystem? (Choose three.)

A.

RAID configuration

B.

installation diagram

C.

Network HUB details

D.

SAN connectivity diagram

Full Access
Question # 13

A port on the Hitachi Thunder 9531V?subsystem needs to be configured to connect to a McData director. Which Hitachi?Resource Manager CLI command implements this?

A.

aufibre -unit DF600 -set -ctl0 -port A C-AL aufibre -unit DF600 -set -ctl0 -port A ?C-AL

B.

aufibre -unit DF600 -set tl1 -port A -fabric aufibre -unit DF600 -set ?tl1 -port A -fabric

C.

aufibre -unit DF600 -set -ctl0 -port A -fabric

D.

aufibre -unit DF600 -set tl1 -port A C-AL aufibre -unit DF600 -set ?tl1 -port A ?C-AL

Full Access
Question # 14

You are installing a floor model of Hitachi Thunder 9570V?subsystem set up as RK+H1H Deskside kit, at a customer site. You have identified a location with power outlets and good ventilation, conforming to the shock and vibration requirements. What fulfills the maintenance clearance requirements of the subsystem?

A.

150cm x 20cm (58.5in. x 7.8in.)

B.

170cm x 25cm (66.3in. x 9.8in.)

C.

200cm x 30cm (78in. x 11.7in.)

D.

250cm x 25cm (97.5in. x 9.8in.)

Full Access
Question # 15

You have enabled password protection on a Hitachi Thunder 9500V?Series subsystem. The customer has forgotten the password. What action should you take?

A.

You contact TRC for help.

B.

You restore the unit to factory settings.

C.

You use Web Access in Maintenance mode to reset the password.

D.

You back up LUN data and the system configuration. You carry out a microcode upgrade and configuration clear using the same microcode level. You restore the system configuration and the LUN data.

Full Access
Question # 16

What is the vibration tolerance of a Hitachi Thunder 9570?subsystem in operation, if installed near large generators located on the floor above or below the subsystem?

A.

2.5 m/s2 or less

B.

3.0 m/s2 or less

C.

3.5 m/s2 or less

D.

4.0 m/s2 or less

Full Access