We at Crack4sure are committed to giving students who are preparing for the Netapp NS0-094 Exam the most current and reliable questions . To help people study, we've made some of our NetApp Hardware Support Engineer Professional Exam exam materials available for free to everyone. You can take the Free NS0-094 Practice Test as many times as you want. The answers to the practice questions are given, and each answer is explained.
You have replaced a failed boot device. You perform boot_recovery and receive no errors. However, when the node reboots, it reports that it has no disks.
What are two possible causes? (Choose two.)
What are two valid commands that can be used to trigger an AutoSupport? (Choose two.)
While setting up a replication between two clusters, an administrator receives the following error message:
Failed to create cluster peering with 'Error: RPC to peer address 192.168.31.10 failed'.
What is the cause of this issue?
In preparation for an upgrade to ONTAP 9.6P8 software, you have uploaded the ONTAP image 96P8_q_nodar_image.tgz onto your local web server with address 192.168.10.10.
Which is correct command syntax to download this image to the cluster image repository?
Which two factors can increase the chances of experiencing a NetApp WAFL inconsistency on an aggregate? (Choose two.)
In a SAS stack of shelves, what is the topology of the connection between expander and disk?
What are two options to remove Failure Byte on disks that are marked as failed? (Choose two.)
During a new SVM deployment, all of the FC LIFs are showing an admin/oper status of up/down. The LIF extended status is Waiting for Link.
What is causing this status?
At what stage is a write acknowledged to a client?
What should be the first step taken after detecting a NetApp WAFL inconsistency?
You are replacing a boot device on a FAS8300 system that is running ONTAP 9.10P6 software. You attach a USB memory stick to the external USB port on the storage controller but cannot access the memory stick.
What step needs to be performed to access the boot device?
You are troubleshooting an L2 connectivity problem, and you want to analyze network traffic.
Which command do you use to capture network packets?
You have upgraded your cluster from ONTAP 9.5 software to ONTAP 9.7 software. After the upgrade, you notice that the upgrade causes issues. You decide to revert to ONTAP 9.5 software.
Which revert step is allowed?
During a health check you observe that NetApp ONTAP software is reporting CRC errors on a network port from a node in the cluster.
Which component do you reseat?
You are upgrading your 6-node NetApp ONTAP cluster from ONTAP 9.9.1 to 9.16.1. As part of the ONTAP software upgrade process, you need to update the cluster switches. After you update the first switch, you receive the following AutoSupport message:
Exhibit — AutoSupport Alert
vifmgr: callhome.clus.net.degraded:alert:
Call home for CLUSTER NETWORK DEGRADED:
Large MTU Packet Loss - Ping failures detected
between Node1_clus1 (169.254.2.94) on Node1
and Node2_clus2 (169.254.248.67) on Node2.
All cluster ports and interfaces are in an up/up status.
What is causing this error?
What happens when the command diskcopy is run from nodeshell?
What are two valid options for uploading a core file from a node that is running ONTAP 9.12.1 software to NetApp for analysis? (Choose two.)
A customer has a 4-node NetApp ONTAP cluster. There are two SVMs on the cluster. One SVM serves NFS home directories, and the other SVM serves SMB shares. Each SVM has one LIF per node using a dedicated port. The NFS SVM LIF is homed on port e1c, and the SMB SVM LIF is homed on port e2c on each node.
All ports and LIFs share the same layer 2 network in the same broadcast domain. There is a requirement that in the event of a physical port failure, NFS and SMB data must never share the same physical port.
Which action meets the requirement?
A 4-node NetApp ONTAP cluster sent an alert that one of the cluster interconnect switches has failed. After replacement, the system administrator notices that half of the cluster LIFs are not on their home ports.
Which parameter must the system administrator enable to automatically migrate the cluster LIFs?
3 Months Free Update
3 Months Free Update
3 Months Free Update