4A0-114 Practice Exam Questions with Answers Nokia Border Gateway Protocol Fundamentals for Services Certification

Optional transitive

Optional non-transitive

Well-known discretionary

Well-known mandatory

Only the route reflector is configured with a cluster id.

There can only be one route reflector in a cluster.

Clients should have iBGP sessions with each other to maintain the mesh.

There can only be one level of route reflectors in the topology.

Peers need to be IP reachable to establish a BGP session.

Route reflectors can reduce the number of iBGP sessions required.

iBGP peers have to be adjacent to each other.

The multihop parameter needs to be configured when eBGP peers are not adjacent to each other.

A full iBGP mesh is required among route reflectors.

A route reflector can have both iBGP and eBGP clients.

A router reflector disables the iBGP split-horizon rule for its clients.

Route reflectors are used to reduce the number of iBGP sessions required in an AS.

Hello

Update

Open

Keep-Alive

Option A

Option B

Option C

Option D

It carries an IP prefix and its associated mask.

It carries an IP address and requests the MAC address of the corresponding host.

It carries a host MAC address and optionally the associated IP address that belongs to the same host.

It carries a host MAC address and optionally the IP prefix of the subnet where the host is located.

MPLS tunnels are used to carry transit traffic across the network.

A full mesh of iBGP peering sessions is not required,

Edge and transit routers need to be configured with BGP.

The transit routers need to support LDP or RSVP-TE LSPs.