Get SMI300XE Dumps : Verified MI300X Expert (SMI300XE) Certification Exam

When a GPU is not detected in theIPMI GUI reports, the recommended recovery method is topower off the system, reseat the GPU and heatsink, then power it back on and check the IPMI GUI for detection. This process ensures that the GPU is properly connected and making full contact with the system board.

Option A (pressing a GPU button for 5 seconds)is incorrect because there is no dedicated reinitialization button for GPU detection in Supermicro MI300X systems.

Option B (removing the GPU tray while powered on)is not advisable as it could cause damage to components.

Option D (reseating the motherboard tray)is unnecessary, as the issue is likely limited to GPU connectivity rather than a full system board issue.

Option C (powering off the system, reseating the GPU, and verifying in IPMI GUI)follows proper troubleshooting guidelines as documented in Supermicro’stroubleshooting and system health monitoring sections?.

Theevent logis the primary source of information for identifyingsystem issues and their exact timing. TheIPMI event logrecords all critical system alerts, includinghardware failures, temperature warnings, power issues, and other critical errors.

Option A (Incorrect):GPU memory specifications do not provide issue tracking information.

Option B (Correct):Theevent log tracks all system events and errors, making it essential for troubleshooting.

Option C (Incorrect):Subnet masks relate to network configurations and do not provide system issue tracking.

Option D (Incorrect):Last login attempts show security logs but arenot related to hardware or system issues.

When removing theGPU tray, it is crucial tokeep it leveltoprevent damage to the chassis and cooling fans below.

Option A (Correct):If the tray tilts, it canhit the upper chassis or damage fans below.

Option B (Incorrect):There isno specific 16-degree angle requirement.

Option C (Incorrect):Work surface placement does not impact removal safety.

Option D (Incorrect):Thescrews must be removed first, but they do not affect the removal angle.

A failed GPU in the Supermicro MI300X system can be identified usingthe warning light indicator. Supermicro systems includeLED diagnostic indicatorsthat display the operational status of various components, including GPUs. When a GPU malfunctions, the system will trigger an alert that is displayed as a warning light on the GPU tray or the server chassis. This allows technicians to visually identify the faulty GPU without requiring extensive hardware testing.

Discoloration (A)is not a reliable method of identifying a failed GPU as it would require physical degradation, which is uncommon.

Serial numbers (B)andPart numbers (C)are used for inventory tracking but do not indicate functional status.

Warning lights (D)are the recommended method, as documented in the system health monitoring section of Supermicro's documentation, which detailsLED indicators and diagnostic lights for system status monitoring?.

TheIPMI storage monitoring sectionprovides information aboutattached storage devices.

Option A (Incorrect):IPMI doesnot display motherboard detailsin this section.

Option B (Incorrect):Overheating issuesare logged separatelyin the event logs.

Option C (Correct):IPMI storage monitoring tracks attached storage devices.

Option D (Incorrect):Severity of health eventsis found in system logs, not storage monitoring.