ARA-R01 Practice Exam Questions with Answers SnowPro Advanced: Architect Recertification Exam Certification

To ensure that an analyst_user can only access Snowflake from specific IP addresses, the following steps are required:

• Option B: This alters the network policy directly linked to analyst_user. Setting a network policy on the user level is effective and ensures that the specified network restrictions apply directly and exclusively to this user.
• Option D: Before a network policy can be set or altered, the appropriate role with permission to manage network policies must be used. SECURITYADMIN is typically the role that has privileges to create and manage network policies in Snowflake. Creating a network policy that specifies allowed IP addresses ensures that only requests coming from those IPs can access Snowflake under this policy. After creation, this policy can be linked to specific users or roles as needed.

Options A and E mention altering roles or using the wrong role (USERADMIN typically does not manage network security settings), and option C incorrectly attempts to set a network policy directly as an IP address, which is not syntactically or functionally valid.References: Snowflake's security management documentation covering network policies and role-based access controls.

These three statements are true according to the Snowflake documentation and the web search results. A row access policy is a feature that allows filtering rows based on user-defined conditions. A row access policy can be applied to an external table, which is a table that reads data from external files in a stage. However, there are some limitations and considerations for using row access policies with external tables.

• An external table can be created with a row access policy by using the WITH ROW ACCESS POLICY clause in the CREATE EXTERNAL TABLE statement. The policy can be applied to the VALUE column, which is the column that contains the raw data from the external files in a VARIANT data type1.
• A row access policy can also be applied to the VALUE column of an existing external table by using the ALTER TABLE statement with the SET ROW ACCESS POLICY clause2.
• A row access policy cannot be directly added to a virtual column of an external table. A virtual column is a column that is derived from the VALUE column using an expression. To apply a row access policy to a virtual column, the policy must be applied to the VALUE column and the expression must be repeated in the policy definition3.
• External tables are not supported as mapping tables in a row access policy. A mapping table is a table that is used to determine the access rights of users or roles based on some criteria. Snowflake does not support using an external table as a mapping table because it may cause performance issues or errors4.
• While cloning a database, Snowflake clones the row access policy, but not the external table. Therefore, the policy in the cloned database refers to a table that is not present in the cloned database. To avoid this issue, the external table must be manually cloned or recreated in the cloned database4.
• A row access policy can be applied to a view created on top of an external table. The policy can be applied to the view itself or to the underlying external table. However, if the policy is applied to the view, the view must be a secure view, which is a view that hides the underlying data and the view definition from unauthorized users5.

References:

• CREATE EXTERNAL TABLE | Snowflake Documentation
• ALTER EXTERNAL TABLE | Snowflake Documentation
• Understanding Row Access Policies | Snowflake Documentation
• Snowflake Data Governance: Row Access Policy Overview
• Secure Views | Snowflake Documentation

• The architecture in the image shows a Snowflake data platform with two databases, DB1 and DB2, and two schemas, SH1 and SH2. DB1 contains a table TBL1 and a stage STAGE1. DB2 contains a table TBL2. The image also shows a snippet of code written in SQL language that copies data from STAGE1 to TBL2 using a file format FF PIPE 1.
• To copy data from DB1 to TBL2, there are two possible options among the choices given:

SQLAI-generated code. Review and use carefully. More info on FAQ.

use database DB2;

use schema SH2;

create stage EXT_STAGE1

url = @DB1.SH1.STAGE1;

• uk.co.certification.simulator.questionpool.PList@18276980

SQLAI-generated code. Review and use carefully. More info on FAQ.

copy into TBL2

from @EXT_STAGE1

file format = (format name = DB1.SH1.FF PIPE 1);

• uk.co.certification.simulator.questionpool.PList@18276cf0

SQLAI-generated code. Review and use carefully. More info on FAQ.

use database DB2;

use schema SH2;

insert into TBL2

select * from DB1.SH1.TBL1;

• The other options are not valid because:

References:

• 1: CREATE STAGE | Snowflake Documentation
• 2: COPY INTO table | Snowflake Documentation
• 3: Cross-database Queries | Snowflake Documentation

• The correct answer is B and E because they use the correct syntax and values for the identifier function and the session variables.
• The identifier function allows you to use a variable or expression as an identifier (such as a table name or column name) in a SQL statement. It takes a single argument and returns it as an identifier. For example, identifier($tbl_ref) returns EMP_TBL as an identifier.
• The session variables are set using the SET command and can be referenced using the $ sign. For example, $var1 returns Name1 as a value.
• Option A is incorrect because it uses Stbl_ref and Scol_ref, which are not valid session variables or identifiers. They should be $tbl_ref and $col_ref instead.
• Option C is incorrect because it uses identifier, which is not a valid syntax for the identifier function. It should be identifier($tbl_ref) instead.
• Option D is incorrect because it uses Cvarl, var2, and var3, which are not valid session variables or values. They should be $var1, $var2, and $var3 instead. References:
• Snowflake Documentation: Identifier Function
• Snowflake Documentation: Session Variables
• Snowflake Learning: SnowPro Advanced: Architect Exam Study Guide

In Snowflake's parameter hierarchy, virtual warehouse parameters take precedence over user parameters. This hierarchy is designed to ensure that settings at the virtual warehouse level, which typically reflect the requirements of a specific workload or set of queries, override the preferences set at the individual user level. This helps maintain consistent performance and resource utilization as specified by the administrators managing the virtual warehouses.References: Snowflake documentation on parameter hierarchy, found in the SnowPro Advanced: Architect learning materials.

The image shows a SQL query that can be used to identify which queries are spilled to remote storage and suggests changing the warehouse parameters to address this issue. Spilling to remote storage occurs when the memory allocated to a warehouse is insufficient to process a query, and Snowflake uses disk or cloud storage as a temporary cache. This can significantly slow down the query performance and increase the cost. To troubleshoot this issue, a Snowflake Architect can run the query shown in the image to find out which queries are spilling, how much data they are spilling, and which warehouses they are using. Then, the architect can adjust the warehouse size, type, or scaling policy to provide enough memory for the queries and avoid spilling12. References:

• Recognizing Disk Spilling
• Managing the Kafka Connector

A clustering key is a subset of columns or expressions that are used to co-locate the data in the same micro-partitions, which are the units of storage in Snowflake. Clustering can improve the performance of queries that filter on the clustering key columns, as it reduces the amount of data that needs to be scanned. The best choice for a clustering key depends on the query patterns and the data distribution in the table. In this case, the columns DeviceId, IOT_timestamp, and CustomerId are frequently used in the filter predicate for the select statement, which means they are good candidates for the clustering key. The columns City and DeviceManufacturer are often retrieved, but not filtered on, so they are not as important for the clustering key. The column UniqueId is used for counting, but it is not a good choice for the clustering key, as it is likely to have a high cardinality and a uniform distribution, which means it will not help to co-locate the data. Therefore, the best option is to use DeviceId and CustomerId as the clustering key, as they can help to prune the micro-partitions and speed up the queries. References: Clustering Keys & Clustered Tables, Micro-partitions & Data Clustering, A Complete Guide to Snowflake Clustering

 This is the correct answer because it allows the company to ingest data from different regions using a storage integration for the external stage. A storage integration is a feature that enables secure and easy access to files in external cloud storage from Snowflake. A storage integration can be used to create an external stage, which is a named location that references the files in the external storage. An external stage can be used to load data into Snowflake tables using the COPY INTO command, or to unload data from Snowflake tables using the COPY INTO LOCATION command. A storage integration can support multiple regions and cloud platforms, as long as the external storage service is compatible with Snowflake12.

References:

• Snowflake Documentation: Storage Integrations
• Snowflake Documentation: External Stages

• The masking policy defined in the image indicates that if a user has the PI_ANALYTICS role, they will be able to see the last 4 characters of the CREDITCARDNO column data in clear text. Otherwise, they will see ‘MASKED’. Since Snowflake system roles have not been granted any additional roles, they won’t have the PI_ANALYTICS role and therefore cannot view the last 4 characters of credit card numbers.
• To apply a masking policy on a column in Snowflake, you need to use the ALTER TABLE … ALTER COLUMN command or the ALTER VIEW command and specify the policy name. For example, to apply the creditcardno_mask policy on the CREDITCARDNO column of the CREDITCARDINFO table, you can use the following command:

ALTER TABLE CREDITCARDINFO ALTER COLUMN CREDITCARDNO SET MASKING POLICY creditcardno_mask;

• For more information on how to create and use masking policies in Snowflake, you can refer to the following resources:

CREATE MASKING POLICY: This document explains the syntax and usage of the CREATE MASKING POLICY command, which allows you to create a new masking policy or replace an existing one.

Using Dynamic Data Masking: This guide provides instructions on how to configure and use dynamic data masking in Snowflake, which is a feature that allows you to mask sensitive data based on the execution context of the user.

ALTER MASKING POLICY: This document explains the syntax and usage of the ALTER MASKING POLICY command, which allows you to modify the properties of an existing masking policy.

References: 1: https://docs.snowflake.com/en/sql-reference/sql/create-masking-policy  2: https://docs.snowflake.com/en/user-guide/security-column-ddm-use  3: https://docs.snowflake.com/en/sql-reference/sql/alter-masking-policy

A transient schema in Snowflake is designed without a Fail-safe period, meaning it does not incur additional storage costs once it leaves Time Travel, and it is not protected by Fail-safe in the event of a data loss. The WITH MANAGED ACCESS option ensures that all privilege grants, including future grants on objects within the schema, are managed by the schema owner, thus restricting object owners from passing on access to other users1.

References =

•Snowflake Documentation on creating schemas1

•Snowflake Documentation on configuring access control2

•Snowflake Documentation on understanding and viewing Fail-safe3

Database replication is a feature that allows you to create a copy of a database in another account, region, or cloud platform for disaster recovery or business continuity purposes. However, not all database objects can be replicated. External tables are one of the exceptions, as they reference data files stored in an external stage that is not part of Snowflake. Therefore, to replicate a database that contains external tables, you need to move the external tables to a separate database that is not replicated, and then replicate the primary database that contains the other objects. This way, you can avoid replication errors and ensure consistency between the primary and secondary databases. The other options are incorrect because they either do not address the issue of external tables, or they use an alternative method that is not supported by Snowflake. You cannot create a clone of the primary database and then replicate it, as replication only works on the original database, not on its clones. You also cannot share the primary database with another account, as sharing is a different feature that does not create a copy of the database, but rather grants access to the shared objects. Finally, you do not need to ensure that the replicated database is in the same region as the external tables, as external tables can access data files stored in any region or cloud platform, as long as the stage URL is valid and accessible. References:

• [Replication and Failover/Failback] 1
• [Introduction to External Tables] 2
• [Working with External Tables] 3
• [Replication : How to migrate an account from One Cloud Platform or Region to another in Snowflake] 4

 A reader account is a type of Snowflake account that allows external users to access data shared by a provider account without being a Snowflake customer. A reader account can be created and managed by the provider account, and can use the Snowflake web interface or JDBC/ODBC drivers to query the shared data. A reader account is billed to the provider account based on the credits consumed by the queries1. A secure view is a type of view that applies row-level security filters to the underlying tables, and masks the data that is not accessible to the user. A secure view can be shared with a reader account to provide granular and governed access to the data2. In this scenario, creating a reader account for the partner and sharing the data sets as secure views would be the most cost-effective and secure design, while using the required Snowflake features, because:

• It would avoid the data transfer and storage costs of using an S3 bucket as a destination, and the potential security risks of exposing the data to unauthorized access or modification.
• It would avoid the complexity and overhead of publishing the data sets on the Snowflake Marketplace, and the potential loss of control over the data ownership and pricing.
• It would avoid the need to create a database user for the partner and grant them access to the required data sets, which would require the partner to have a Snowflake account and consume the provider’s resources.

References:

• Reader Accounts
• Secure Views

A. The Snowflake SQL REST API does support the use of a GET command, which can be used to retrieve the status of a previously submitted query or to fetch the results of a query once it has been executed.D. The use of a CALL command to a stored procedure is supported, which can return a result set, including a table. This allows the invocation of stored procedures within Snowflake through the SQL REST API.

According to the Snowflake documentation, the data loading performance can be improved by following some best practices and guidelines for preparing and staging the data files. One of the recommendations is to aim for data files that are roughly 100-250 MB (or larger) in size compressed, as this will optimize the number of parallel operations for a load. Smaller files should be aggregated and larger files should be split to achieve this size range. Another recommendation is to use a multi-cluster warehouse for loading, as this will allow for scaling up or out the compute resources depending on the load demand. A single-cluster warehouse may not be able to handle the load concurrency and throughput efficiently. Therefore, by creating a multi-cluster warehouse and merging smaller files to create bigger files, the data loading performance can be improved. References:

• Data Loading Considerations
• Preparing Your Data Files
• Planning a Data Load

 Option C is the correct answer because it allows the company to share data privately with the customer across different cloud platforms and regions. The company can create a new Snowflake account in Azure East US 2 (Virginia) and set up replication between AWS us-west-2 (Oregon) and Azure East US 2 (Virginia) for the database objects to be shared. This way, the company can ensure that the data is always up to date and consistent in both accounts. The company can then create a share and add the database privileges to the share, and alter the share and add the customer’s Snowflake account to the share. The customer can then access the shared data from their own Snowflake account in Azure East US 2 (Virginia).

Option A is incorrect because the Snowflake Marketplace is not a private way of sharing data. The Snowflake Marketplace is a public data exchange platform that allows anyone to browse and subscribe to data sets from various providers. The company would not be able to control who can access their data if they use the Snowflake Marketplace.

Option B is incorrect because it requires the customer to create a new Snowflake account in Azure East US 2 (Virginia), which may not be feasible or desirable for the customer. The customer may already have an existing Snowflake account in a different cloud platform or region, and may not want to incur additional costs or complexity by creating a new account.

Option D is incorrect because it involves creating a reader account in Azure East US 2 (Virginia), which is a limited and temporary way of sharing data. A reader account is a special type of Snowflake account that can only access data from a single share, and has a fixed duration of 30 days. The company would have to manage the reader account’s URL and credentials, and renew the account every 30 days. The customer would not be able to use their own Snowflake account to access the shared data, and would have to rely on the company’s reader account.

References:

• Snowflake Replication
• Secure Data Sharing Overview
• Snowflake Marketplace Overview
• Reader Account Overview

The get command in SnowSQL is a convenient way to download files from an internal stage to a local directory. The get command can be used in interactive mode or in a script, and it supports wildcards and parallel downloads. The get command also allows specifying the overwrite option, which determines how to handle existing files with the same name2

The Snowflake Connector for Python, the Snowflake API endpoint, and the get command in Snowsight are not recommended methods for downloading files from an internal stage, because they require more operational overhead than the get command in SnowSQL. The Snowflake Connector for Python and the Snowflake API endpoint require writing and maintaining code to handle the connection, authentication, and file transfer. The get command in Snowsight requires using the web interface and manually selecting the files to download34 References:

• 1: SnowPro Advanced: Architect | Study Guide
• 2: Snowflake Documentation | Using the GET Command
• 3: Snowflake Documentation | Using the Snowflake Connector for Python
• 4: Snowflake Documentation | Using the Snowflake API
• : Snowflake Documentation | Using the GET Command in Snowsight
• : SnowPro Advanced: Architect | Study Guide
• : Using the GET Command
• : Using the Snowflake Connector for Python
• : Using the Snowflake API
• : [Using the GET Command in Snowsight]

The minimum value supported for the buffer.flush.time property is 1 (in seconds). For higher average data flow rates, we suggest that you decrease the default value for improved latency. If cost is a greater concern than latency, you could increase the buffer flush time. Be careful to flush the Kafka memory buffer before it becomes full to avoid out of memory exceptions. https://docs.snowflake.com/en/user-guide/data-load-snowpipe-streaming-kafka

• The correct answer is A because it improves the performance of queries by reducing the amount of data scanned and processed. By adding a create_date field with a timestamp data type, Snowflake can automatically cluster the table based on this field and prune the micro-partitions that do not match the filter condition. This avoids the need to parse the JSON data and access the variant field for every record.
• Option B is incorrect because it does not improve the performance of queries. By adding a create_date field with a varchar data type, Snowflake cannot automatically cluster the table based on this field and prune the micro-partitions that do not match the filter condition. This still requires parsing the JSON data and accessing the variant field for every record.
• Option C is incorrect because it does not address the root cause of the performance issue. By validating the size of the warehouse being used, Snowflake can adjust the compute resources to match the data volume and parallelize the query execution. However, this does not reduce the amount of data scanned and processed, which is the main bottleneck for queries on JSON data.
• Option D is incorrect because it adds unnecessary complexity and overhead to the data loading and querying process. By incorporating the use of multiple tables partitioned by date ranges, Snowflake can reduce the amount of data scanned and processed for queries that specify a date range. However, this requires creating and maintaining multiple tables, loading data into the appropriate table based on the date, and joining the tables for queries that span multiple date ranges. References:
• Snowflake Documentation: Loading Data Using Snowpipe: This document explains how to use Snowpipe to continuously load data from external sources into Snowflake tables. It also describes the syntax and usage of the COPY INTO command, which supports various options and parameters to control the loading behavior, such as ON_ERROR, PURGE, and SKIP_FILE.
• Snowflake Documentation: Date and Time Data Types and Functions: This document explains the different data types and functions for working with date and time values in Snowflake. It also describes how to set and change the session timezone and the system timezone.
• Snowflake Documentation: Querying Metadata: This document explains how to query the metadata of the objects and operations in Snowflake using various functions, views, and tables. It also describes how to access the copy history information using the COPY_HISTORY function or the COPY_HISTORY view.
• Snowflake Documentation: Loading JSON Data: This document explains how to load JSON data into Snowflake tables using various methods, such as the COPY INTO command, the INSERT command, or the PUT command. It also describes how to access and query JSON data using the dot notation, the FLATTEN function, or the LATERAL join.
• Snowflake Documentation: Optimizing Storage for Performance: This document explains how to optimize the storage of data in Snowflake tables to improve the performance of queries. It also describes the concepts and benefits of automatic clustering, search optimization service, and materialized views.

In the context of business intelligence (BI) queries, which are typically focused on data analysis and reporting, the star schema is the most suitable data modeling approach.

Option B: Star Schema - The star schema is a type of relational database schema that is widely used for developing data warehouses and data marts for BI purposes. It consists of a central fact table surrounded by dimension tables. The fact table contains the core data metrics, and the dimension tables contain descriptive attributes related to the fact data. The simplicity of the star schema allows for efficient querying and aggregation, which are common operations in BI reporting.

To provide the highest uptime and least application disruption in case of a service event, the best option is to use the Business Critical Snowflake edition and connect the applications using the - URL. The Business Critical Snowflake edition offers the highest level of security, performance, and availability for Snowflake accounts. It includes features such as customer-managed encryption keys, HIPAA compliance, and 4-hour RPO and RTO SLAs. It also supports account replication and failover across regions and cloud platforms, which enables business continuity and disaster recovery. By using the - URL, the applications can leverage the Snowflake Client Redirect feature, which automatically redirects the client connections to the secondary account in case of a failover. This way, the applications can seamlessly switch to the backup account without any manual intervention or configuration changes. The other options are less cost-effective or less reliable because they either use a lower edition of Snowflake, which does not support account replication and failover, or they use the - URL, which does not support client redirect and requires manual updates to the connection string in case of a failover. References:

• [Snowflake Editions] 1
• [Replication and Failover/Failback] 2
• [Client Redirect] 3
• [Snowflake Account Identifiers] 4

• According to the Principle of Least Privilege, the Architect should grant the minimum privileges necessary for the USER1 to find the tables in the SANDBOX database.
• The USER1 needs to have USAGE privilege on the SANDBOX database and the SANDBOX.PUBLIC schema to be able to access the tables in the PUBLIC schema. Therefore, the commands B and C are the correct ones to run.
• The command A is not correct because the PUBLIC role is automatically granted to every user and role in the account, and it does not have any privileges on the SANDBOX database by default.
• The command D is not correct because it would transfer the ownership of the SANDBOX database from the Architect to the USER1, which is not necessary and violates the Principle of Least Privilege.
• The command E is not correct because it would grant all the possible privileges on the SANDBOX database to the USER1, which is also not necessary and violates the Principle of Least Privilege.

References: : Snowflake - Principle of Least Privilege : Snowflake - Access Control Privileges : Snowflake - Public Role : Snowflake - Ownership and Grants

According to the SnowPro Advanced: Architect documents and learning resources, the best way to enable optimal clustering to enhance performance for different access paths on a given table is to create multiple materialized views with different cluster keys. A materialized view is a pre-computed result set that is derived from a query on one or more base tables. A materialized view can be clustered by specifying a clustering key, which is a subset of columns or expressions that determines how the data in the materialized view is co-located in micro-partitions. By creating multiple materialized views with different cluster keys, an Architect can optimize the performance of queries that use different access paths on the same base table. For example, if a base table has columns A, B, C, and D, and there are queries that filter on A and B, or on C and D, or on A and C, the Architect can create three materialized views, each with a different cluster key: (A, B), (C, D), and (A, C). This way, each query can leverage the optimal clustering of the corresponding materialized view and achieve faster scan efficiency and better compression.

References:

• Snowflake Documentation: Materialized Views
• Snowflake Learning: Materialized Views

https://www.snowflake.com/blog/using-materialized-views-to-solve-multi-clustering-performance-problems/

According to the SnowPro Advanced: Architect Exam Study Guide, to enable the search optimization service on a table, the user must have the ADD SEARCH OPTIMIZATION privilege on the table and the schema. The privilege can be granted explicitly or inherited from a higher-level object, such as a database or a role. The OWNERSHIP privilege on a table implies the ADD SEARCH OPTIMIZATION privilege, so the user who owns the table can enable the search optimization service on it. Therefore, the correct answer is to assume a role with OWNERSHIP on VPN_ACCESS_LOGS and ADD SEARCH OPTIMIZATION in the SECURITY_LOGS schema. This will allow the user to enable the search optimization service on the VPN_ACCESS_LOGS table and any future tables created in the SECURITY_LOGS schema. The other options are incorrect because they either grant excessive privileges or do not grant the required privileges on the table or the schema. References:

• SnowPro Advanced: Architect Exam Study Guide, page 11, section 2.3.1
• Snowflake Documentation: Enabling the Search Optimization Service

A. The Search Optimization Service is designed to accelerate the performance of queries that use filters on large tables. One of the key considerations for its effectiveness is using it with tables where the columns used in the filter conditions have a high number of distinct values, typically in the hundreds of thousands or more. This is because the service creates a map-reduce-like index on the column to speed up queries that use point lookups or range scans on that column. The more unique values there are, the more effective the index is at narrowing down the search space.References: Snowflake documentation and best practices on the Search Optimization Service, which would be covered under the SnowPro Advanced: Architect certification materials.

• Warehouse credits are used to pay for the processing time used by each virtual warehouse in Snowflake. A virtual warehouse is a cluster of compute resources that enables executing queries, loading data, and performing other DML operations. Warehouse credits are charged based on the number of virtual warehouses you use, how long they run, and their size1.
• Among the commands listed in the question, the following ones will use warehouse credits:
• The command that will not use warehouse credits is:

References: : Understanding Compute Cost : MAX Function : COUNT Function : GROUP BY Clause : SHOW TABLES

• Snowflake supports data sharing across regions and cloud platforms using account replication and share replication features. Account replication enables the replication of objects from a source account to one or more target accounts in the same organization. Share replication enables the replication of shares from a source account to one or more target accounts in the same organization1.
• To share data from the MARKET_DB database in the ACCOUNTA account in AWS us-east-1 region with the PARTNERB account in Azure East US 2 region, the following steps must be performed:
• Therefore, option C is the correct answer.

References: : Replicating Shares Across Regions and Cloud Platforms : Working with Organizations and Accounts : Replicating Databases Across Multiple Accounts : Replicating Shares Across Multiple Accounts

To change the edition of a Snowflake account, an organization administrator (ORGADMIN) cannot directly alter the account settings through SQL commands or the Snowflake interface. The proper procedure is to contact Snowflake Support to request an edition change for the account. This ensures that the change is managed correctly and aligns with Snowflake’s operational protocols.

References: This process is outlined in the Snowflake documentation, which specifies that changes to an account’s edition should be facilitated through Snowflake Support1.

 Snowflake Connector for Kafka and Snowpipe are two ingestion methods that can be used to load near real-time data by using the messaging services provided by a cloud provider. Snowflake Connector for Kafka enables you to stream structured and semi-structured data from Apache Kafka topics into Snowflake tables. Snowpipe enables you to load data from files that are continuously added to a cloud storage location, such as Amazon S3 or Azure Blob Storage. Both methods leverage Snowflake’s micro-partitioning and columnar storage to optimize data ingestion and query performance. Snowflake streams and Spark are not ingestion methods, but rather components of the Snowflake architecture. Snowflake streams provide change data capture (CDC) functionality by tracking data changes in a table. Spark is a distributed computing framework that can be used to process large-scale data and write it to Snowflake using the Snowflake Spark Connector. References:

• Snowflake Connector for Kafka
• Snowpipe
• Snowflake Streams
• Snowflake Spark Connector

According to the SnowPro Advanced: Architect documents and learning resources, the ways that Snowflake databases that are created from shares differ from standard databases that are not created from shares are:

• Shared databases are read-only. This means that the data consumers who access the shared databases cannot modify or delete the data or the objects in the databases. The data providers who share the databases have full control over the data and the objects, and can grant or revoke privileges on them1.
• Shared databases cannot be cloned. This means that the data consumers who access the shared databases cannot create a copy of the databases or the objects in the databases. The data providers who share the databases can clone the databases or the objects, but the clones are not automatically shared2.
• Shared databases are not supported by Time Travel. This means that the data consumers who access the shared databases cannot use the AS OF clause to query historical data or restore deleted data. The data providers who share the databases can use Time Travel on the databases or the objects, but the historical data is not visible to the data consumers3.

The other options are incorrect because they are not ways that Snowflake databases that are created from shares differ from standard databases that are not created from shares. Option B is incorrect because shared databases do not need to be refreshed in order for new data to be visible. The data consumers who access the shared databases can see the latest data as soon as the data providers update the data1. Option E is incorrect because shared databases will not have the PUBLIC or INFORMATION_SCHEMA schemas without explicitly granting these schemas to the share. The data consumers who access the shared databases can only see the objects that the data providers grant to the share, and the PUBLIC and INFORMATION_SCHEMA schemas are not granted by default4. Option F is incorrect because shared databases cannot be created as transient databases. Transient databases are databases that do not support Time Travel or Fail-safe, and can be dropped without affecting the retention period of the data. Shared databases are always created as permanent databases, regardless of the type of the source database5. References: Introduction to Secure Data Sharing | Snowflake Documentation, Cloning Objects | Snowflake Documentation, Time Travel | Snowflake Documentation, Working with Shares | Snowflake Documentation, CREATE DATABASE | Snowflake Documentation

The Snowflake architecture recommendation that necessitates multiple Snowflake accounts for implementation is the separation of development, test, and production environments. This approach, known as Account per Tenant (APT), isolates tenants into separate Snowflake accounts, ensuring dedicated resources and security isolation12.

References

•Snowflake’s white paper on “Design Patterns for Building Multi-Tenant Applications on Snowflake” discusses the APT model and its requirement for separate Snowflake accounts for each tenant1.

•Snowflake Documentation on Secure Data Sharing, which mentions the possibility of sharing data across multiple accounts3.

The correct answer is option B. This query is designed to assess the need for a multi-cluster warehouse by examining the queuing time (AVG_QUEUED_LOAD) on different days and virtual warehouses. When the AVG_QUEUED_LOAD is greater than zero, it suggests that queries are waiting for resources, which can be an indicator that performance might be improved by using a multi-cluster warehouse to handle the workload more efficiently. By grouping by date and warehouse name and filtering on the sum of the average queued load being greater than zero, the query identifies specific days and warehouses where the workload exceeded the available compute resources. This information is valuable when considering scaling out warehouses to multi-cluster configurations for improved performance.

Data is being imported and stored as JSON in a VARIANT column. Query performance was fine, but most recently, poor query performance has been reported. This could be caused by the following factors:

• The order of the keys in the JSON was changed. Snowflake stores semi-structured data internally in a column-like structure for the most common elements, and the remainder in a leftovers-like column. The order of the keys in the JSON affects how Snowflake determines the common elements and how it optimizes the query performance. If the order of the keys in the JSON was changed, Snowflake might have to re-parse the data and re-organize the internal storage, which could result in slower query performance.
• There were variations in string lengths for the JSON values in the recent data imports. Non-native values, such as dates and timestamps, are stored as strings when loaded into a VARIANT column. Operations on these values could be slower and also consume more space than when stored in a relational column with the corresponding data type. If there were variations in string lengths for the JSON values in the recent data imports, Snowflake might have to allocate more space and perform more conversions, which could also result in slower query performance.

The other options are not valid causes for poor query performance:

• There were JSON nulls in the recent data imports. Snowflake supports two types of null values in semi-structured data: SQL NULL and JSON null. SQL NULL means the value is missing or unknown, while JSON null means the value is explicitly set to null. Snowflake can distinguish between these two types of null values and handle them accordingly. Having JSON nulls in the recent data imports should not affect the query performance significantly.
• The recent data imports contained fewer fields than usual. Snowflake can handle semi-structured data with varying schemas and fields. Having fewer fields than usual in the recent data imports should not affect the query performance significantly, as Snowflake can still optimize the data ingestion and query execution based on the existing fields.

References:

• Considerations for Semi-structured Data Stored in VARIANT
• Snowflake Architect Training
• Snowflake query performance on unique element in variant column
• Snowflake variant performance

Enabling the search optimization service on the table can improve the performance of queries that have selective filtering criteria, which seems to be the case here. This service optimizes the execution of queries by creating a persistent data structure called a search access path, which allows some micro-partitions to be skipped during the scanning process. This can significantly speed up query performance without increasing compute costs1.

References

•Snowflake Documentation on Search Optimization Service1.

These two configuration options can enhance the performance of the workload that consists of a huge number of concurrent queries that are smaller and faster.

• Enabling a multi-clustered virtual warehouse in maximized mode allows the warehouse to scale out automatically by adding more clusters as soon as the current cluster is fully loaded, regardless of the number of queries in the queue. This can improve the concurrency and throughput of the workload by minimizing or preventing queuing. The maximized mode is suitable for workloads that require high performance and low latency, and are less sensitive to credit consumption1.
• Setting the MAX_CONCURRENCY_LEVEL to a higher value than its default value of 8 at the virtual warehouse level allows the warehouse to run more queries concurrently on each cluster. This can improve the utilization and efficiency of the warehouse resources, especially for smaller and faster queries that do not require a lot of processing power. The MAX_CONCURRENCY_LEVEL parameter can be set when creating or modifying a warehouse, and it can be changed at any time2.

References:

• Snowflake Documentation: Scaling Policy for Multi-cluster Warehouses
• Snowflake Documentation: MAX_CONCURRENCY_LEVEL

 According to the SnowPro Advanced: Architect documents and learning resources, the minimum object privileges required for the Snowpipe user to execute Snowpipe are:

• OWNERSHIP on the named pipe. This privilege allows the Snowpipe user to create, modify, and drop the pipe object that defines the COPY statement for loading data from the stage to the table1.
• USAGE and READ on the named stage. These privileges allow the Snowpipe user to access and read the data files from the stage that are loaded by Snowpipe2.
• USAGE on the target database and schema. These privileges allow the Snowpipe user to access the database and schema that contain the target table3.
• INSERT and SELECT on the target table. These privileges allow the Snowpipe user to insert data into the table and select data from the table4.

The other options are incorrect because they do not specify the minimum object privileges required for the Snowpipe user to execute Snowpipe. Option A is incorrect because it does not include the READ privilege on the named stage, which is required for the Snowpipe user to read the data files from the stage. Option C is incorrect because it does not include the OWNERSHIP privilege on the named pipe, which is required for the Snowpipe user to create, modify, and drop the pipe object. Option D is incorrect because it does not include the OWNERSHIP privilege on the named pipe or the READ privilege on the named stage, which are both required for the Snowpipe user to execute Snowpipe. References: CREATE PIPE | Snowflake Documentation, CREATE STAGE | Snowflake Documentation, CREATE DATABASE | Snowflake Documentation, CREATE TABLE | Snowflake Documentation

• To create a read-only role for certain employees working in the human resources department, the role needs to have the following permissions on the hr_db database:
• Option A is the correct answer because it grants the minimum permissions required for a read-only role on the hr_db database.
• Option B is incorrect because SELECT on schemas is not a valid permission. Schemas only support USAGE and CREATE permissions.
• Option C is incorrect because MODIFY on the database is not a valid permission. Databases only support USAGE, CREATE, MONITOR, and OWNERSHIP permissions. Moreover, USAGE on tables is not sufficient for querying the data. Tables support SELECT, INSERT, UPDATE, DELETE, TRUNCATE, REFERENCES, and OWNERSHIP permissions.
• Option D is incorrect because REFERENCES on tables is not relevant for querying the data. REFERENCES permission allows the role to create foreign key constraints on the tables.

References:

• : https://docs.snowflake.com/en/user-guide/security-access-control-privileges.html#database-privileges
• : https://docs.snowflake.com/en/user-guide/security-access-control-privileges.html#schema-privileges
• : https://docs.snowflake.com/en/user-guide/security-access-control-privileges.html#table-privileges

 To maximize memory and compute resources for a Snowpark stored procedure, you need to set the MAX_CONCURRENCY_LEVEL parameter for the warehouse that executes the stored procedure. This parameter determines the maximum number of concurrent queries that can run on a single warehouse. By setting it to 16, you ensure that the warehouse can use all the available CPU cores and memory on a single node, which is the optimal configuration for Snowpark-optimized warehouses. This will improve the performance and efficiency of the stored procedure, as it will not have to share resources with other queries or nodes. The other options are incorrect because they either do not change the MAX_CONCURRENCY_LEVEL parameter, or they set it to a lower value than 16, which will reduce the memory and compute resources for the stored procedure. References:

• [Snowpark-optimized Warehouses] 1
• [Training Machine Learning Models with Snowpark Python] 2
• [Snowflake Shorts: Snowpark Optimized Warehouses] 3

This design meets all the requirements for the data pipeline. Snowpipe is a feature that enables continuous data loading into Snowflake from object storage using event notifications. It is efficient, scalable, and serverless, meaning it does not require any infrastructure or maintenance from the user. Streams and tasks are features that enable automated data pipelines within Snowflake, using change data capture and scheduled execution. They are also efficient, scalable, and serverless, and they simplify the data transformation process. External functions are functions that can invoke external services or APIs from within Snowflake. They can be used to integrate with Amazon Comprehend and perform sentiment analysis on the data. The results can be written back to a Snowflake table using standard SQL commands. Snowflake Marketplace is a platform that allows data providers to share data with data consumers across different accounts, regions, and cloud platforms. It is a secure and easy way to make data publicly available to other companies.

References:

• Snowpipe Overview | Snowflake Documentation
• Introduction to Data Pipelines | Snowflake Documentation
• External Functions Overview | Snowflake Documentation
• Snowflake Data Marketplace Overview | Snowflake Documentation

For ingesting a large volume of CSV data into Snowflake using Snowpipe, especially for a substantial amount like 10 TB, the on error = SKIP_FILE option in the COPY INTO command can be highly effective. This approach allows Snowpipe to skip over files that cause errors during the ingestion process, thereby not halting or significantly slowing down the overall data load. It helps in maintaining performance and cost-effectiveness by avoiding the reprocessing of problematic files and continuing with the ingestion of other data.

B. When dealing with PCI DSS compliance, having separate accounts can be beneficial because it enables strong isolation of environments that handle sensitive data from those that do not. By segregating the compliant from non-compliant resources, an organization can limit the scope of compliance, thus making it a cost-effective strategy.D. Different Active Directory instances can be managed more effectively and securely when separated into different accounts. This approach allows for distinct identity and access management policies, which can enforce security requirements and minimize the risk of access policy errors between environments.

 Snowflake context functions are functions that return information about the current session, user, role, warehouse, database, schema, or object. They can be used to help determine whether a user is authorized to see data that has column-level security enforced by setting masking policy conditions based on the context functions. The following context functions are relevant for column-level security:

• current_role: This function returns the name of the role in use for the current session. It can be used to set masking policy conditions that target the current session and are not affected by the execution context of the SQL statement. For example, a masking policy condition using current_role can allow or deny access to a column based on the role that the user activated in the session.
• invoker_role: This function returns the name of the executing role in a SQL statement. It can be used to set masking policy conditions that target the executing role and are affected by the execution context of the SQL statement. For example, a masking policy condition using invoker_role can allow or deny access to a column based on the role that the user specified in the SQL statement, such as using the AS ROLE clause or a stored procedure.
• is_role_in_session: This function returns TRUE if the user’s current role in the session (i.e. the role returned by current_role) inherits the privileges of the specified role. It can be used to set masking policy conditions that involve role hierarchy and privilege inheritance. For example, a masking policy condition using is_role_in_session can allow or deny access to a column based on whether the user’s current role is a lower privilege role in the specified role hierarchy.

The other options are not valid ways to use the Snowflake context functions for column-level security:

• Set masking policy conditions using is_role_in_session targeting the role in use for the current account. This option is incorrect because is_role_in_session does not target the role in use for the current account, but rather the role in use for the current session. Also, the current account is not a role, but rather a logical entity that contains users, roles, warehouses, databases, and other objects.
• Determine if there are ownership privileges on the masking policy that would allow the use of any function. This option is incorrect because ownership privileges on the masking policy do not affect the use of any function, but rather the ability to create, alter, or drop the masking policy. Also, this is not a way to use the Snowflake context functions, but rather a way to check the privileges on the masking policy object.
• Assign the accountadmin role to the user who is executing the object. This option is incorrect because assigning the accountadmin role to the user who is executing the object does not involve using the Snowflake context functions, but rather granting the highest-level role to the user. Also, this is not a recommended practice for column-level security, as it would give the user full access to all objects and data in the account, which could compromise data security and governance.

References:

• Context Functions
• Advanced Column-level Security topics
• Snowflake Data Governance: Column Level Security Overview
• Data Security Snowflake Part 2 - Column Level Security

According to the Snowflake documentation, unstructured data files can be shared by using a secure view and Secure Data Sharing. A secure view allows the result of a query to be accessed like a table, and a secure view is specifically designated for data privacy. A scoped URL is an encoded URL that permits temporary access to a staged file without granting privileges to the stage. The URL expires when the persisted query result period ends, which is currently 24 hours. A scoped URL is recommended for file administrators to give scoped access to data files to specific roles in the same account. Snowflake records information in the query history about who uses a scoped URL to access a file, and when. Therefore, a scoped URL is the best option to share unstructured data within Snowflake, as it provides security, accountability, and control over the data access. References:

• Sharing unstructured Data with a secure view
• Introduction to Loading Unstructured Data

This is the correct answer because it allows the ORDER_ADMIN role to perform the data cleanup without needing the DELETE privilege on the ORDERS table. A stored procedure is a feature that allows scheduling and executing SQL statements or stored procedures in Snowflake. A stored procedure can run with either the caller’s rights or the owner’s rights. A caller’s rights stored procedure runs with the privileges of the role that called the stored procedure, while an owner’s rights stored procedure runs with the privileges of the role that created the stored procedure. By creating a stored procedure that runs with owner’s rights, the ORDER_MANAGER role can delegate the specific task of deleting old data to the ORDER_ADMIN role, without granting the ORDER_ADMIN role more general privileges on the ORDERS table. The stored procedure must include the appropriate business logic to delete only the records older than 5 years, and the ORDER_MANAGER role must grant the USAGE privilege on the stored procedure to the ORDER_ADMIN role. The ORDER_ADMIN role can then execute the stored procedure to perform the data cleanup12.

References:

• Snowflake Documentation: Stored Procedures
• Snowflake Documentation: Understanding Caller’s Rights and Owner’s Rights Stored Procedures