CTFL4 Practice Exam Questions with Answers ISTQB Certified Tester Foundation Level CTFL 4.0 Exam Certification

The tests at the bottom layer of the test pyramid run faster than the tests at the top layer of the pyramid because they are more focused, isolated, and atomic. They usuallytest individual units or components of the software system, such as classes, methods, or functions. They are also easier to maintain and execute, as they have fewer dependencies and interactions with other parts of the system. The tests at the top layer of the test pyramid, on the other hand, are slower because they cover larger pieces of functionalities, such as user interfaces, workflows, or end-to-end scenarios. They also have more dependencies and interactions with other systems, such as databases, networks, or external services. They are more complex and costly to maintain and execute, as they require more setup and teardown procedures, test data, and test environments. References: ISTQB Certified Tester Foundation Level (CTFL) v4.0 sources and documents:

ISTQB® Certified Tester Foundation Level Syllabus v4.0, Chapter 3.2.1, Test Pyramid1

ISTQB® Glossary of Testing Terms v4.0, Test Pyramid2

The minimum number of test cases needed to cover every unique sequence of up to 3 states/2 transitions starting in the “Start” state and ending in the “End” state is 4. This is because there are 4 unique sequences of up to 3 states/2 transitions starting in the “Start” state and ending in the “End” state:

Start -> Bet -> End

Start -> Deal -> End

Start -> 1st Deal -> End

Start -> 2nd Deal -> End References: ISTQB Certified Tester Foundation Level (CTFL) v4.0 sources and documents.

Static analysis is the process of examining the work products of a software development or testing activity without executing them. Static analysis can be applied to various types of work products, such as requirements, design, code, test cases, etc. However, test plans are not suitable for static analysis, because they are high-level documents that describe the test objectives, scope, strategy, resources, schedule, and risks of a testing project. Test plans are not executable or formalized in a way that static analysis tools can analyze them. Therefore, option A is the correct answer.

References: ISTQB® Certified Tester Foundation Level Syllabus v4.01, Section 2.2.1, page 20; ISTQB® Glossary v4.02, page 45.

The question is about identifying an example of testing contributing to higher quality. Quality is the degree to which a component, system or process meets specified requirements and/oruser/customer needs and expectations1. Testing is the process consisting of all lifecycle activities, both static and dynamic, concerned with planning, preparation and evaluation of software products and related work products to determine that they satisfy specified requirements, to demonstrate that they are fit for purpose and to detect defects2.

Therefore, testing contributes to higher quality by verifying and validating that the software products and related work products meet the specified requirements, are fit for purpose and have no defects, or at least have a reduced number of defects. Testing also provides information about the quality of the software products and related work products to the stakeholders, who can make informed decisions based on the test results3.

Out of the four given statements, only option D is an example of testing contributing to higher quality, as it shows that testing has detected a defect (a flaw in a component or system that can cause the component or system to fail to perform its required function4) and that the defect has been resolved (fixed and confirmed) prior to release (delivery of the software product to the customer or end user). This means that testing has prevented a potential failure (an event in which a component or system does not perform a required function within specified limits) from occurring in the operational environment, and thus has improved the quality of the software product.

Option A is not an example of testing contributing to higher quality, as it is a reporting activity that summarizes the test results and evaluates the test objectives, but does not directly affect the quality of the software product or related work products. A test summary report is a document that records and communicates the outcomes of testing activities, including test completion criteria, test results, incident reports, test summary and evaluation, and lessons learned.

Option B is not an example of testing contributing to higher quality, as it is a planning activity that estimates the resources and time needed for testing activities, but does not directly affect the quality of the software product or related work products. A test effort estimate is an approximation of the amount of work and/or the duration of time required to perform testing activities.

Option C is not an example of testing contributing to higher quality, as it is a preparation activity that sets up the test environment (an environment containing hardware, instrumentation, simulators, software tools, and other support elements needed to conduct a test), but does not directly affect the quality of the software product or related work products. A test environment installation is a process of installing and configuring the test environment according to the test environment specification.

References:

1: ISTQB Certified Tester Foundation Level Syllabus 2018, Version 4.0, p. 10

2: ISTQB Certified Tester Foundation Level Syllabus 2018, Version 4.0, p. 11

3: ISTQB Certified Tester Foundation Level Syllabus 2018, Version 4.0, p. 12

4: ISTQB Certified Tester Foundation Level Syllabus 2018, Version 4.0, p. 13

: ISTQB Certified Tester Foundation Level Syllabus 2018, Version 4.0, p. 13

: ISTQB Certified Tester Foundation Level Syllabus 2018, Version 4.0, p. 77

: ISTQB Certified Tester Foundation Level Syllabus 2018, Version 4.0, p. 78

: ISTQB Certified Tester Foundation Level Syllabus 2018, Version 4.0, p. 79

: ISTQB Certified Tester Foundation Level Syllabus 2018, Version 4.0, p. 80

: ISTQB Certified Tester Foundation Level Syllabus 2018, Version 4.0, p. 81

: ISTQB Certified Tester Foundation Level Syllabus 2018, Version 4.0, p. 82

: ISTQB Certified Tester Foundation Level Syllabus 2018, Version 4.0, p. 83

: ISTQB Certified Tester Foundation Level Syllabus 2018, Version 4.0, p. 84

: ISTQB Certified Tester Foundation Level Syllabus 2018, Version 4.0, p. 85

: ISTQB Certified Tester Foundation Level Syllabus 2018, Version 4.0, p. 86

: ISTQB Certified Tester Foundation Level Syllabus 2018, Version 4.0, p. 87

: ISTQB Certified Tester Foundation Level Syllabus 2018, Version 4.0, p. 88

: ISTQB Certified Tester Foundation Level Syllabus 2018, Version 4.0, p. 89

: ISTQB Certified Tester Foundation Level Syllabus 2018, Version 4.0, p. 90

: ISTQB Certified Tester Foundation Level Syllabus 2018, Version 4.0, p. 91

: ISTQB Certified Tester Foundation Level Syllabus 2018, Version 4.0, p. 92

: ISTQB Certified Tester Foundation Level Syllabus 2018, Version 4.0, p. 93

: ISTQB Certified Tester Foundation Level Syllabus 2018, Version 4.0, p. 94

: ISTQB Certified Tester Foundation Level Syllabus 2018, Version 4.0, p. 95

: ISTQB Certified Tester Foundation Level Syllabus 2018, Version 4.0, p. 96

: ISTQB Certified Tester Foundation Level Syllabus 2018, Version 4.0, p. 97

: ISTQB Certified Tester Foundation Level Syllabus 2018, Version 4.0, p. 98

: ISTQB Certified Tester Foundation Level Syllabus 2018, Version 4.0, p. 99

: ISTQB Certified Tester Foundation Level Syllabus 2018, Version 4.0, p. 100

: ISTQB Certified Tester Foundation Level Syllabus 2018, Version 4.0, p. 101

: ISTQB Certified Tester Foundation Level Syllabus 2018, Version 4.0, p. 102

: ISTQB Certified Tester Foundation Level Syllabus 2018, Version 4.0, p. 103

: ISTQB Certified Tester Foundation Level Syllabus 2018, Version 4.0, p. 104

: ISTQB Certified Tester Foundation Level Syllabus 2018, Version 4.0, p. 105

: ISTQB Certified Tester Foundation Level Syllabus 2018, Version 4.0, p. 106

: ISTQB Certified Tester Foundation Level Syllabus 2018, Version 4.0, p. 107

During the review planning stage, key decisions are made, including the selection of standards and procedures to be followed during the review. This planning phase ensures that the review process is structured and adheres to agreed-upon standards, which can come from industry standards such as ISO/IEC/IEEE 29119-3. The ISTQB CTFL Syllabus v4.0 emphasizes the importance of review planning in establishing the framework and guidelines for the review process??.

According to the ISTQB Glossary of Testing Terms, Version 4.0, 2018, page 18, a failure is “an event in which a component or system does not perform a required function within specified limits”. In this case, the calculator software does not perform the required function of calculating the correct result for 5+6 within the specified limits of accuracy and precision. Therefore, this is an example of a failure.

The other options are incorrect because:

A mistake is “a human action that produces an incorrect result” (page 25). A mistake is not an event, but an action, and it may or may not lead to a failure. For example, a mistake could be a typo in the code, a wrong assumption in the design, or a misunderstanding of the requirement.

A fault is “a defect in a component or system that can cause the component or system to fail to perform its required function” (page 16). A fault is not an event, but a defect, and it may or may not cause a failure. For example, a fault could be a logical error in the code, a missing specification in the design, or a contradiction in the requirement.

An error is “the difference between a computed, observed, or measured value or condition and the true, specified, or theoretically correct value or condition” (page 15). An error is not an event, but a difference, and it may or may not result in a failure. For example, an error could be a rounding error in the calculation, a measurement error in the observation, or a deviation error in the condition.

References = ISTQB Glossary of Testing Terms, Version 4.0, 2018, pages 15-18, 25; ISTQB CTFL 4.0 - Sample Exam - Answers, Version 1.1, 2023, Question 96, page 34.

Using equivalence partitioning, the investment ranges are divided into four partitions:

R500 to R10,000 (10%)

R10,001 to R50,000 (11%)

R50,001 to R100,000 (12%)

R100,001 to R500,000 (13%)

Thus, the minimum number of test cases required to cover all valid equivalence partitions for calculating the interest is 4??.

A new navigation system compared with a previous system is the most suitable application for testing by use cases, because it involves a high level of interaction between the user and the system, and the expected behavior and outcomes of the system are based on the user’s needs and goals. Use cases can help to specify the functional requirements of the new navigation system, such as the ability to enter a destination, select a route, follow the directions, receive alerts, etc. Use cases can also help to compare the accuracy and usability of the new system with the previous system, by defining the success and failure scenarios, the preconditions and postconditions, and the alternative flows of each use case. Use cases can also help to design and execute test cases that cover the main and exceptional paths of each use case, and to verify the satisfaction of the user’s expectations.

The other options are not the most suitable applications for testing by use cases, because they do not involve a high level of interaction between the user and the system, or the expected behavior and outcomes of the system are not based on the user’s needs and goals. A billing system used to calculate monthly charge based on a large number of subscriber parameters is more suitable for testing by data-driven testing, which is a technique for testing the functionality and performance of a system or component by using a large set of input and output data. The ability of an antivirus package to detect and quarantine a new threat is more suitable for testing by exploratory testing, which is a technique for testing the functionality and security of a system or component by using an informal and flexible approach, based on the tester’s experience and intuition. The suitability and performance of a multimedia (audio video based) system to a new operating system is more suitable for testing by compatibility testing, which is a technique for testing the functionality and performance of a system or component by using different hardware, software, or network environments. References = CTFL 4.0 Syllabus, Section 3.1.1, page 28-29; Section 4.1.1, page 44-45; Section 4.2.1, page 47-48.

To apply one-dimensional equivalence partitioning to the ID requirement, we need to consider each condition individually:

Length of the ID: Valid partitions (5-10 characters), Invalid partitions (less than 5, more than 10) = 3 partitions.

Type of characters: Valid partitions (alphanumeric), Invalid partitions (non-alphanumeric) = 2 partitions.

First character: Valid partitions (letter), Invalid partitions (non-letter) = 2 partitions. Adding these partitions, we get a total of 3 (length) + 2 (character type) + 2 (first character) = 7 partitions. Thus, the correct answer is A??.

This answer is correct because shift-left in testing is an approach that aims to perform testing activities as early as possible in the software development lifecycle, in order to find and fix defects faster and cheaper, and to improve the quality of the software product. Continuous integration is a practice that supports shift-left in testing, as it involves integrating and testing the software components frequently, usually several times a day, using automated tools and processes. Continuous integration can reduce the time between the introduction of a defect and its detection, thereby reducing the cost to fix it and the risk of accumulating defects that could affect the functionality or performance of the software product. References: ISTQB Foundation Level Syllabus v4.0, Section 3.1.1.3, Section 3.2.1.3

Metrics can be collected during and at the end of testing activities to assess various aspects including progress against the planned schedule and budget, the current quality of the test object, the adequacy of the test approach, and the effectiveness of the test activities with respect to the objectives. Collecting these metrics helps in understanding the overall performance and quality of the testing process??.

The state transition diagram provided shows three distinct states:

Waiting for fingerprint

Waiting for PIN

Valid PIN/ask menu selection

Each state represents a different stage in the system's operation, with transitions based on user actions and system responses??.

Test exit criteria are the conditions that must be fulfilled before concluding a particular testing phase. These criteria act as a checkpoint to assess whether we have achieved the testing objectives and are done with testing1. Test exit criteria are typically defined in the test plan document, which is one of the outputs of the test planning phase. The test plan document describes the scope, approach, resources, and schedule of the testing activities. It also identifies the test items, the features to be tested, the testing tasks, the risks, and the test deliverables2. According to the ISTQB® Certified Tester Foundation Level Syllabus v4.0, the test plan document should include the following information related to the test exit criteria3:

The criteria for evaluating test completion, such as the percentage of test cases executed, the percentage of test coverage achieved, the number and severity of defects found and fixed, the quality and reliability of the software product, and the stakeholder satisfaction.

The criteria for evaluating test process improvement, such as the adherence to the test strategy, the efficiency and effectiveness of the testing activities, the lessons learned and best practices identified, and the recommendations for future improvements.

Therefore, the test plan document is the most appropriate test document to find the test exit criteria described. The other options, such as test design specification, project plan, and requirements specification, are not directly related to the test exit criteria. The test design specification describes the test cases and test procedures for a specific test level or test type3. The project plan describes the overall objectives, scope, assumptions, risks, and deliverables of the software project4. The requirementsspecification describes the functional and non-functional requirements of the software product5. None of these documents specify the conditions for ending the testing process or evaluating the testing outcomes. References = ISTQB® Certified Tester Foundation Level Syllabus v4.0, Entry and Exit Criteria in Software Testing | Baeldung onComputer Science, Entry And Exit Criteria In Software Testing - Rishabh Software, Entry and Exit Criteria in Software Testing Life Cycle - STLC [2022 Updated] - Testsigma Blog, ISTQB® releases Certified Tester Foundation Level v4.0 (CTFL).

Comprehensive and Detailed In-Depth Explanation:Checklist-based testingusesspecific test conditions(B) that help testers ensure key aspects are validated. The checklist items can be derived from past defects, requirements, or regulatory standards.

(A) is incorrectbecause general guidelines lack specificity.

(C) is incorrectbecause checklists can be used for both manual and automated testing.

(D) is incorrectbecause checklists are useful for both functional and non-functional testing (e.g., security, performance).

Checklistshelp ensure completenesswithout enforcingstrictly scriptedexecution.

According to the decision table in the image, a Preferred Guest Card holder with a Silver room is eligible for an upgrade to Gold Luxury (YES), while a non-Preferred Guest Card holder, regardless of room type, is not eligible for any upgrade (NO). Therefore, Customer A (a Preferred Guest Card holder with a Silver room) would be offered an upgrade to Gold Luxury, and Customer B (a non-Preferred Guest Card holder with a Platinum room) would not be offered any upgrade. References = The answer is derived directly from the decision table provided in the image; specific ISTQB Certified Tester Foundation Level (CTFL) v4.0 documents are not referenced.

Traceability primarily refers to the ability to link test cases back to their sources in the test basis, such as requirements or design documents. This linkage allows for the determination of coverage, impact analysis, and maintaining consistency across test documentation. However, traceability does not directly enable the application of experience-based test techniques, which are more about using the tester's intuition and experience. The ISTQB CTFL Syllabus v4.0 does not state that traceability enables experience-based techniques, making option B the false statement??.

This answer is correct because in Agile software development, work product documentation, such as user stories, acceptance criteria, or test cases, tends to be lightweight and concise, as the focus is on working software and frequent communication rather than comprehensive documentation. Manual tests tend to be often unscripted, as they are often produced using experience-based test techniques, such as error guessing or exploratory testing, which rely on the tester’s skills, knowledge, and creativity to find defects and provide feedback. References: ISTQB Foundation Level Syllabus v4.0, Section 3.1.1.2, Section 3.2.1.2

The features of the test object to be tested and those excluded from the testing represent information that is usually included in a test plan and, in the given test plan, it is more likely to be specified within “Test Scope” rather than in the other two sections mentioned. The test scope defines the boundaries and limitations of the testing activities, such as the test items, the features to be tested, the features not to be tested, the test objectives, the test environment, the test resources, the test assumptions, the test risks, etc. The test scope helps to establish a common understanding of what is included and excluded from the testing, and to avoid ambiguity, confusion, or misunderstanding among the stakeholders. The other two sections, “Testing Communication” and “Stakeholders”, are also important parts of a test plan, but they do not directly address the features of the test object. The testing communication describes the methods, frequency, and responsibilities for the communication and reporting of the testing progress, status, issues, and results. The stakeholders identify the roles and responsibilities of the people involved in or affected by the testing activities, such as the test manager, the test team, the project manager, the developers, the customers, the users, etc. References: ISTQB Certified Tester Foundation Level (CTFL) v4.0 sources and documents:

ISTQB® Certified Tester Foundation Level Syllabus v4.0, Chapter 2.1.1, Test Planning1

ISTQB® Glossary of Testing Terms v4.0, Test Plan, Test Scope2

Comprehensive and Detailed In-Depth Explanation:Retrospectives provide value by fostering improvement and collaboration. The correct mapping is:

A2: Team bonding occurs when teams openly discuss issues.

B1: Test effectiveness increases when process improvements are implemented.

C4: Test basis improves by addressing requirement deficiencies.

D3: Cooperation improves through regular review of collaboration.

In software testing, risks are categorized into product risks and project risks. Product risks are associated with the potential of a product to fail in meeting its quality criteria. Project risks are related to potential issues that could affect the project's ability to deliver a product.

[i] is a project risk because it concerns the availability and adequacy of hardware resources for performance testing.

[ii] is a product risk because it pertains to a security and functionality issue within the web application.

[iii] is a project risk because it involves the availability of necessary requirements documentation for the testing process.

[iv] is a product risk because it relates to the system's functionality and data integrity after a failure.

Thus, statement A correctly classifies [ii] and [iv] as product risks and [i] and [iii] as project risks??.

Experience-based testing techniques leverage the tester's intuition and prior experience to identify defects that systematic techniques might miss. These techniques are valuable because they can uncover issues based on real-world usage and scenarios that aren't always covered by more formalized black-box and white-box methods. The ISTQB CTFL Syllabus v4.0 highlights the complementary nature of experience-based techniques in providing a broader defect detection strategy??.

The whole team approach, often advocated in Agile methodologies, emphasizes collaboration and collective responsibility among all team members. This approach enhances the relationships within the team and improves overall collaboration, which in turn benefits the project's success. According to the ISTQB CTFL Syllabus v4.0, the whole team approach fosters better communication and cooperation, leading to more effective problem-solving and higher-quality outcomes??.

Comprehensive and Detailed In-Depth Explanation:Static analysis requires access towork products like source code, models, or documentation, making itimpossible to analyze Commercial off-the-shelf (COTS) software(A) because its source code is typically unavailable. Static analysis is applicable to source code (B), BPMN models (C), and UML diagrams (D).

Comprehensive and Detailed In-Depth Explanation:Product risksare risks thatimpact the quality or functionality of the software, whereasproject risksaffect theprocess, resources, or timeline.

(A) is correctbecause incorrect calculations impact software correctness.

(B), (C), and (D) are project risksas they relate toteam coordination, staffing, and schedulingrather than software defects.

Identifyingproduct risksearlyimproves defect detection and ensures better coverage for high-risk areas.

The whole team approach involves collaboration among all team members, including testers, developers, and business representatives, to achieve quality goals. However, this approach may not be suitable in situations where a high level of test independence is required. Test independence is essential in cases where unbiased testing is critical, such as in regulated environments or where high-risk systems are involved. This is because team members might unintentionally influence each other's work, leading to potential bias in testing outcomes??.

Comprehensive and Detailed In-Depth Explanation:Configuration management (B)ensures thatversions of software and test artifactsare properly tracked, stored, and retrievable. It allows teams to:

Restoreearlier versions of software and test work products

Maintaintraceability between requirements, tests, and code

Avoid discrepancies due tomismanaged versions

(A) is incorrectbecause defect managementtracks issues but does not restore versions.

(C) is incorrectbecause change managementcontrols changes but does not track past versions.

(D) is incorrectbecause risk managementassesses risks but does not manage software versions.

Effective configuration management ensures the ability to roll back changesand maintain system stability.

In a formal review process, the recorder's role is typically responsible for documenting the findings of the review team, including action items, decisions, and recommendations. This ensures that there is an accurate record of what was discussed and agreed upon, facilitating follow-up and continuous improvement. Therefore, statement C is correct as per the ISTQB CTFL syllabus??.

When writing a defect report, the tester can specify the expected result and the actual result based on the observation. The expected result is what the requirements specify, and the actual result is what was observed during testing. These elements are crucial for clearly communicating the nature of the defect to developers and other stakeholders. The other items such as test environment, test level, and root cause may not be clear or necessary at this stage of defect reporting.

References:ISTQB CTFL Syllabus, Section on defect management and reporting.

Comprehensive and Detailed In-Depth Explanation:TheModerator(D) plays a key role informal reviewsby facilitating discussions, ensuring that reviews stay on track, and creating an open environment for feedback. TheManager (A)is responsible for overseeing the testing process but does not directly facilitate reviews. TheReviewer (B)is responsible for examining the work product, while theReview Leader (C)organizes reviews but does not necessarily mediate them.

 State testing techniques are a type of dynamic testing techniques that are based on the behavior of the system under test for different input conditions and events. Dynamic testing techniques require the system to be executed with test cases, whereas static testing techniques do not. Static testing techniques can be applied before the code is ready for execution, such as reviews, inspections, walkthroughs, and static analysis. Static testing techniques can help find defects early in the development process, improve the quality of the code, and reduce the cost and effort of dynamic testing. References = ISTQB Certified Tester Foundation Level (CTFL) v4.0 Syllabus, Chapter 4, Section 4.2.1, Page 281; ISTQB Glossary of Testing Terms v4.0, Page 292

Structural testing is a type of testing that measures its effectiveness by tracking which lines of code were executed by the tests. Structural testing, also known as white-box testing or glass-box testing, is based on the internal structure, design, or implementation of the software. Structural testing aims to verify that the software meets the specified quality attributes, such as performance, security, reliability, or maintainability, by exercising the code paths, branches, statements, conditions, or data flows. Structural testing uses various coverage metrics, such as function coverage, line coverage, branch coverage, or statement coverage, to determine how much of the code has been tested and to identify any untested or unreachable parts of the code. Structural testing can be applied at any level of testing, such as unit testing, integration testing, system testing, or acceptance testing, but it is more commonly used at lower levels, where the testers have access to the source code.

The other options are not correct because they are not types of testing that measure their effectiveness by tracking which lines of code were executed by the tests. Acceptance testing is a type of testing that verifies that the software meets the acceptance criteria and the user requirements. Acceptance testing is usually performed by the end-users or customers, who may not have access to the source code or the technical details of the software. Acceptance testing is more concerned with the functionality, usability, or suitability of the software, rather than its internal structure or implementation. Integration testing is a type of testing that verifies that the software components or subsystems work together as expected. Integration testing is usually performed by the developers or testers, who may use both structural and functional testing techniques to check the interfaces, interactions, or dependencies between the components or subsystems. Integration testing is more concerned with the integration logic, data flow, or communication of the software, rather than its individual lines of code. Exploratory testing is a type of testing that involves simultaneous learning, test design, and test execution. Exploratory testing is usually performed by the testers, who use their creativity, intuition, or experience to explore the software and discover any defects, risks, or opportunities for improvement. Exploratory testing is more concerned with the behavior, quality, or value of the software, rather than its internal structure or implementation. References = ISTQB Certified Tester Foundation Level (CTFL) v4.0 syllabus, Chapter 4: Test Techniques, Section 4.3: Structural Testing Techniques, Pages 51-54; Chapter 1: Fundamentals of Testing, Section 1.4: Testing Throughout the Software Development Lifecycle, Pages 11-13; Chapter 3: Static Testing, Section 3.4: Exploratory Testing, Pages 40-41.

Rule 5 in the decision table indicates that when the object is within 5 metres of the vehicle and the sensitivity mode is switched "on", no LED is lit. This matches the conditions and actions described in the decision table provided, ensuring that only the red LED is lit when the sensitivity mode is on and the object is within 1 metre, otherwise no LED is lit .

The fact that defects are usually not evenly distributed among the various modules that make up a software application, but rather their distribution tend to reflect the Pareto principle, is expressed by the testing principle referred to as ‘Defects cluster together’. This principle states that a small number of modules contain most of the defects detected, or that a small number of causes are responsible for most of the defects. This principle can be used to guide the test analysis and design activities, by prioritizing the testing of the most critical or risky modules, or by applying more rigorous test techniques to them. Therefore, option C is the correct answer.

References: ISTQB® Certified Tester Foundation Level Syllabus v4.01, Section 1.2.1, page 11; ISTQB® Glossary v4.02, page 16.

Comprehensive and Detailed In-Depth Explanation:Statement coverage strategyprioritizestest cases with higher statement coverage first, whileresolving dependenciesbefore execution.

TC60 (7%)has thehighest coveragebutdepends on REQ 1, so it should be executedafter its dependency is covered.

TC80 (6%)depends onREQ 2, so it should be prioritizedafter TC40 (REQ 2).

TC40 (5%)andTC90 (5%)should be executed early.

Lower coverage test cases (TC10, TC70, TC30, TC20) should come last.

Thus, the correct order is{TC 60; TC 80; TC 40; TC 90; TC 50; TC 10; TC 70; TC 30; TC 20} (D).

Comprehensive and Detailed In-Depth Explanation:The primary objectives of testing, as outlined in the ISTQB CTFL v4.0 syllabus, include verifying whether specified requirements are met (A), detecting failures and defects (B), and validating that the test object functions as expected (D). However, "finding errors" (C) is not a direct objective. Errors result from human mistakes, but testing primarily identifies defects, which are flaws in the system that cause failures. Testing aims to reveal defects rather than directly identify errors in the code.

Experience-based test techniques are test design techniques that rely on the experience, knowledge, intuition, and creativity of the testers to identify and execute test cases that are likely to find defects in the software system. Experience-based test techniques are often useful to detect hidden defects that have not been targeted by black-box test techniques, which are test design techniques that use the external behavior and specifications of the software system as the test basis, without considering its internal structure or implementation. Experience-based test techniques can complement black-box test techniques by covering aspects that are not explicitly specified, such as usability, security, reliability, performance, etc. The other statements are false, because:

Experience-based test techniques do not rely on the experience of testers to identify the root causes of defects found by black-box test techniques, but rather to identify the potential sources of defects based on their own insights, heuristics, or exploratory testing. The root causes of defects are usually identified by debugging or root cause analysis, which are activities that involve examining the code or the development process to find and fix the errors that led to the defects.

Some of the most common test basis used by white-box test techniques include the source code, the design documents, the architecture diagrams, and the control flow graphs of the software system. White-box test techniques are test design techniques that use the internal structure and implementation of the software system as the test basis, and aim to achieve a certain level of test coverage based on the code elements, such as statements, branches, paths, etc. User stories, use cases, and business processes are examples of test basis used by black-box test techniques, as they describe the functional and non-functional requirements of the software system from the perspective of the users or the stakeholders.

The primary goal of experience-based test techniques is not to design test cases that can be easily automated using a GUI-based test automation tool, but rather to design test cases that can reveal defects that are not easily detected by other test techniques, such as boundary value analysis, equivalence partitioning, state transition testing, etc. Test automation is the use of software tools to execute test cases and compare actual results with expected results, without human intervention. Test automation can be applied to different types of test techniques, depending on the test objectives, the test levels, the test tools, and the test resources. However, test automation is not always feasible or beneficial, especially for test cases that require human judgment, creativity, or exploration, such as those designed by experience-based test techniques. References: ISTQB Certified Tester Foundation Level (CTFL) v4.0 sources and documents:

ISTQB® Certified Tester Foundation Level Syllabus v4.0, Chapter 2.2.1, Black-box Test Design Techniques

ISTQB® Certified Tester Foundation Level Syllabus v4.0, Chapter 2.2.2, White-box Test Design Techniques

ISTQB® Certified Tester Foundation Level Syllabus v4.0, Chapter 2.2.3, Experience-based Test Design Techniques

ISTQB® Glossary of Testing Terms v4.0, Experience-based Test Technique, Black-box Test Technique, White-box Test Technique, Test Basis, Test Coverage, Test Automation

Comprehensive and Detailed In-Depth Explanation:Confirmation testingis performed after a defect is fixed to confirm it no longer exists (A).Regression testingensures new defects have not been introduced in unchanged parts of the system. Regression testing is broader than confirmation testing and covers unmodified areas affected by the changes. Options B, C, and D misrepresent the relationship and scope of these tests.

Comprehensive and Detailed In-Depth Explanation:Atest progress reportprovides an overview of testing activities, metrics, and identified risks. It focuses on tracking testing progress rather thanevaluating overall product quality (B), which is typically included in atest summary reportafter testing is completed.

(A) is correctbecause obstacles (challenges) are reported to ensure test execution stays on track.

(C) is correctas test metrics help stakeholders track execution progress.

(D) is correctbecause new or changed risks impact test focus and priorities.

A test progress reporttracks execution and informs stakeholders about ongoing testing activities.

A typical test plan includes various elements, such as resource requirements, test completion criteria, and suspension/resumption criteria. However, the list of product risks that have not been fully mitigated is generally not included in the test plan but rather in the risk management documentation.

The test plan focuses on planning and executing tests, including resource allocation and defining criteria for test suspension and resumption.

While risk management is crucial, unmitigated risks are typically documented in risk logs or separate risk management plans.

Failures can be caused by defects, but also by environmental conditions. A failure is an event in which the software system does not perform a required function or performs a function incorrectly, according to the expected behavior. A defect is a flaw in the software system or a deviation from the requirements or the specifications, that may cause a failure. However, not all failures are caused by defects, as some failures may be caused by environmental conditions, such as hardware malfunctions, network interruptions, power outages, incompatible configurations, etc. Environmental conditions are factors that affect the operation of the software system, but are not part of the software system itself. The other statements are false, because:

A defect does not always produce a failure, while a bug always produces a failure. This statement is false, because a defect may or may not produce a failure, depending on the inputs, the outputs, the states, or the scenarios of the software system, and a bug is just another term for a defect, so it has the same possibility of producing a failure as a defect. For example, a defect in a rarely used feature or a hidden branch of the code may never produce a failure, while a defect in a frequently used feature or a critical path of the code may produce a failure often. A bug is not a different concept from a defect, but rather a synonym or a colloquial term for a defect, so it has the same definition and implications as a defect.

A defect may cause a failure which, when occurring, always causes an error. This statement is false, because an error is not a consequence of a failure, but rather a cause of a defect. An error is a human action or a mistake that produces a defect in the software system, such as a typo, a logic flaw, a requirement misunderstanding, etc. An error is not observable in the software system, but rather in the human mind or the human work products, such as the code, the design, the documentation, etc. A failure is not a cause of an error, but rather a result of a defect, which is a result of an error. For example, an error in the code may cause a defect in the software system, which may cause a failure in the software behavior.

Bugs are defects found during component testing, while failures are defects found at higher test levels. This statement is false, because bugs and failures are not different types of defects, but rather different terms for defects and their manifestations. As mentioned before, bugs are just another word for defects, and failures are the events in which the software system does not perform as expected due to defects. Bugs and failures can be found at any test level, not only at component testing or higher test levels. Test levels are the stages of testing that correspond to the levels of integration of the software system, such as component testing, integration testing, system testing, and acceptance testing. Defects and failures can occur and be detected at any test level, depending on the test objectives, the test basis, the test techniques, and the test environment. References: ISTQB Certified Tester Foundation Level (CTFL) v4.0 sources and documents:

ISTQB® Certified Tester Foundation Level Syllabus v4.0, Chapter 1.1.2, Testing and Quality1

ISTQB® Certified Tester Foundation Level Syllabus v4.0, Chapter 1.2.1, Testing Principles1

ISTQB® Certified Tester Foundation Level Syllabus v4.0, Chapter 1.3.1, Testing in Software Development Lifecycles1

ISTQB® Glossary of Testing Terms v4.0, Failure, Defect, Bug, Environmental Condition, Error, Test Level2

For boundary value analysis, the test cases should include the boundary values just inside and just outside the equivalence partition for the 13% interest rate range:

R100,000 (just inside the previous range)

R100,001 (start of the 13% range)

R500,000 (end of the 13% range)

R500,001 (just outside the range)

These values ensure that both the edges of the partition are tested??.

As a functional tester, you should open a defect report providing detailed information on which devices and by running which tests you observed the issue. A defect report is a document that records the occurrence, nature, and status of a defect detected during testing, and provides information for further investigation and resolution. A defect report should include relevant information such as the defect summary, the defect description, the defect severity, the defect priority, the defect status, the defect origin, the defect category, the defect reproduction steps, the defect screenshots, the defect attachments, etc. Opening a defect report is a good practice for any tester who finds a defect in the software system, regardless of the type or level of testing performed. The other options are not recommended, because:

The issue is related to performance efficiency, not functionality, but that does not mean that as a functional tester, you should not open any defect report as all the functional tests passed. Performance efficiency is a quality characteristic that measures how well the software system performs its functions under stated conditions, such as the response time, the resource utilization, the throughput, etc. Performance efficiency is an important aspect of the user experience, especially for web applications that run on different devices and networks. Even if the functional tests passed, meaning that the software system met the functional requirements, the performance issue observed on some devices could still affect the user satisfaction, the usability, the reliability, and the security of the software system. Therefore, as a functional tester, you have the responsibility to report the performance issue as a defect, and provide as much information as possible to help the developers or the performance testers to investigate and resolve it.

Comprehensive and Detailed In-Depth Explanation:The whole-team approach promotes collaboration among stakeholders (business representatives, developers, and testers) to ensure better quality and project success (A). This approach allows for early identification of issues, enhances shared responsibility, and improves software quality. Option C is a valid but indirect benefit, while options B and D do not directly describe the core advantage of the whole-team approach.

The ISTQB fundamental test process consists of five main phases, as described in the ISTQB Foundation Level Syllabus, Version 4.0, 2018, Section 2.2, page 15:

Test planning and control: This phase involves defining the test objectives, scope, strategy, resources, schedule, risks, and metrics, as well as monitoring and controlling the test activities and results throughout the test process.

Test analysis and design: This phase involves analyzing the test basis (such as requirements, specifications, or user stories) to identify test conditions (such as features, functions, or scenarios) that need to be tested, and designing test cases and test procedures (such as inputs, expected outcomes, and execution steps) to cover the test conditions. This phase also involves evaluating the testability of the test basis and the test items (such as software or system components), and selecting and implementing test techniques (such as equivalence partitioning, boundary value analysis, or state transition testing) to achieve the test objectives and optimize the test coverage and efficiency.

Test implementation and execution: This phase involves preparing the test environment (such as hardware, software, data, or tools) and testware (such as test cases, test procedures, test data, or test scripts) for test execution, and executing the test procedures or scripts according to the test plan and schedule. This phase also involves logging the outcome of test execution, comparing the actual results with the expected results, and reporting any discrepancies as incidents (such as defects, errors, or failures).

Evaluating exit criteria and reporting: This phase involves checking if the planned test activities have been completed and the exit criteria (such as quality, coverage, or risk levels) have been met, and reporting the test results and outcomes to the stakeholders. This phase also involves making recommendations for the release or acceptance decision based on the test results and outcomes, and identifying any residual risks (such as known defects or untested areas) that need to be addressed or mitigated.

Test closure activities: This phase involves finalizing and archiving the testware and test environment for future reuse, and evaluating the test process and the test project against the test objectives and the test plan. This phase also involves identifying any lessons learned and best practices, and communicating the findings and suggestions for improvement to the relevant parties.

References = ISTQB Certified Tester Foundation Level Syllabus, Version 4.0, 2018, Section 2.2, page 15; ISTQB Glossary of Testing Terms, Version 4.0, 2018, pages 37-38; ISTQB CTFL 4.0 - Sample Exam - Answers, Version 1.1, 2023, Question 88, page 32.

Comprehensive and Detailed In-Depth Explanation:Theratio-based estimation methodrelies on historical relationships betweendevelopment and testing effort.

Using the given5:3 ratio:

Thus, the correct answer is270 person-days (D).

(A) and (C) are incorrectas they overestimate the effort.

(B) underestimates the testing effort based on the ratio.

Ratio-based estimationhelps allocate resources effectively based on past project data.

When working on a project with incomplete requirements and under pressure to deploy, exploratory testing is particularly suitable. This type of testing allows testers to use their expertise and intuition to explore the system's functionality and identify defects without needing detailed specifications. Exploratory testing is flexible and can quickly adapt to changes and gaps in the requirements??.

Comprehensive and Detailed In-Depth Explanation:During iteration planning, testers provide input on risk analysis, testability, and the feasibility of test automation.Participating in risk analysis (B)helps identify areas needing more extensive testing.

(A) is incorrectbecause the test strategy is usually set at a higher level (project or release level).

(C) is incorrectas release planning is broader than iteration planning.

(D) is incorrectsince writing user stories is mainly the responsibility of theproduct owner, though testers contribute to defining acceptance criteria.

Risk-based test prioritizationensures testing efforts are aligned with business needs and software risks.

In software testing terminology, a failure is an observable deviation of the software from its expected behavior. A defect (or bug) is the cause of the failure in the software's code. In this case, the observed slowdown is the failure, while the underlying memory leak in the application code is the defect causing this failure. This distinction is clearly outlined in the ISTQB CTFL Syllabus v4.0, which differentiates between failures (observable issues) and defects (underlying issues in the code)??.

A failure is an event in which a component or system does not perform a required function within specified limits1. A requirement is a condition or capability needed by a user to solve aproblem or achieve an objective2. In this case, the requirement is that the diagnostics tests should execute in less than 2 seconds. Therefore, any event that violates this requirement is a failure. The only option that clearly violates this requirement is B. The diagnostic tests take too much time to execute. If the diagnostic tests take more than 2 seconds to complete, then they do not meet the specified limit and thus fail. The other options are not necessarily failures related to the specified requirement. Option A. The diagnostic tests fail to start after a system reset is a failure, but not related to the time limit. It is related to the functionality of the self-diagnostics module. Option C. The diagnostic tests that measure the speed of the memory, fail is also a failure, but not related to the time limit. It is related to the accuracy of the memory tests. Option D. The diagnostic tests fail due to incorrect implementation of the test code is also a failure, but not related to the time limit. It is related to the quality of the test code. References = ISTQB® Certified Tester Foundation Level Syllabus v4.0, Requirements Engineering Fundamentals.