SPLK-1002 Practice Exam Questions with Answers Splunk Core Certified Power User Exam Certification

In Splunk, the transaction command is used to group events that share common characteristics into a single transaction1. By default, the transaction command groups all matching events into a single transaction1.

However, you can use the maxspan option to limit the time span of the transactions1. If the time span between the first and last event in a transaction exceeds the maxspan value, the transaction command will start a new transaction1.

Therefore, if the maxspan option is not included in the search, the transaction command might produce multiple transactions instead of one if the time span between the first and last event in a transaction exceeds the default maxspan value1.

Here is an example of how you can use the maxspan option in a search:

index=main sourcetype=access_combined | transaction someuniqefield maxspan=1h

In this search, the transaction command groups events that share the same someuniqefield value into a single transaction, but only if the time span between the first and last event in the transaction does not exceed 1 hour1. If the time span exceeds 1 hour, the transaction command will start a new transaction1.

The where command can be used to complete the search below.

… | where failure>successes

The where command is a search command that allows you to filter events based on complex or custom criteria. The where command can use any boolean expression or function to evaluate each event and determine whether to keep it or discard it. The where command can also compare fields or perform calculations on fields using operators such as >, <, =, +, -, etc. The where command can be used after any transforming command that creates a table or a chart.

The search string below does the following:

• It uses … to represent any search criteria or commands before the where command.
• It uses the where command to filter events based on a comparison between two fields: failure and successes.
• It uses the greater than operator (>) to compare the values of failure and successes fields for each event.
• It only keeps events where failure is greater than successes.

When defining a search macro, the required elements are the name and the definition of the macro. The name is a unique identifier for the macro that can be used to invoke it in other searches. The definition is the search string that the macro expands to when referenced. The arguments, validation expression, and validation error message are optional elements that can be used to customize the macro behavior and input validation2

1: Splunk Core Certified Power User Track, page 9. 2: Splunk Documentation, Define search macros in Settings.

The correct answer is D. field2 values are replaced with the value of the field1.

A field alias is a way to associate an additional (new) name with an existing field name. A field alias can be used to normalize fields from different sources that have different names but represent the same data. Field aliases can also be used to rename fields for clarity or convenience1.

When you create a field alias in Splunk Web, you can select the Overwrite Field Values option to change the behavior of the field alias. This option affects how the Splunk software handles situations where the original field has no value or does not exist, as well as situations where the alias field already exists as a field in your events, alongside the original field2.

If you select the Overwrite Field Values option, the following rules apply:

• If the original field does not exist or has no value in an event, the alias field is removed from that event.
• If the original field and the alias field both exist in an event, the value of the alias field is replaced with the value of the original field.

If you do not select the Overwrite Field Values option, the following rules apply:

• If the original field does not exist or has no value in an event, the alias field is unchanged in that event.
• If the original field and the alias field both exist in an event, both fields are retained with their respective values.

Therefore, if you create a field alias where field1—field2 and select the Overwrite Field Values option, and an event only contains values for field1, then the value of field2 will be replaced with the value of field1.

References:

• About calculated fields
• About field aliases
• Create field aliases in Splunk Web

Splunk ships with the following KMZ files for choropleth maps: States of the United States and Countries of the World. A KMZ file is a compressed file that contains a KML file and other resources. A KML file is an XML file that defines geographic features and their properties. A KMZ file can be used to create choropleth maps in Splunk by using the geom command. A choropleth map is a type of map that shows geographic regions with different colors based on some metric. Splunk ships with two KMZ files that define the geographic regions for choropleth maps:

• States of the United States: This KMZ file defines the 50 states of the United States and their boundaries. The name of this KMZ file is us_states.kmz and it is located in the $SPLUNK_HOME/etc/apps/maps/appserver/static/geo directory.
• Countries of the World: This KMZ file defines the countries of the world and their boundaries. The name of this KMZ file is world_countries.kmz and it is located in the $SPLUNK_HOME/etc/apps/maps/appserver/static/geo directory.

Splunk does not ship with KMZ files for States and provinces of the United States and Canada or Countries of the European Union. However, you can create your own KMZ files or download them from external sources and use them in Splunk.

The correct answer is C. ‘weekly_sales (3.99, 10)’. This is because search macros accept arguments without quotation marks or dollar signs, and the number of arguments must match the number of parameters defined in the macro. The other options are incorrect because they either use quotation marks or dollar signs around the arguments, or they provide a different number of arguments than the macro expects. You can learn more about how to use search macros in searches from the Splunk documentation1.

The transaction command is used to group events that are related by some common fields or conditions, such as start/end values, time span, or pauses. The stats command is used to calculate statistics on a group of events by a common field value.

References

Splunk Community

Splunk Transaction - Exact Details You Need

 The following search would create a graph similar to the one below:

index_internal sourcetype=Savesplunker | fields sourcetype, status | transaction status maxspan=1d | timechart count by status

The search does the following:

• It uses index_internal to specify the internal index that contains Splunk logs and metrics.
• It uses sourcetype=Savesplunker to filter events by the sourcetype that indicates the Splunk Enterprise Security app.
• It uses fields sourcetype, status to keep only the sourcetype and status fields in the events.
• It uses transaction status maxspan=1d to group events into transactions based on the status field with a maximum time span of one day between the first and last events in a transaction.
• It uses timechart count by status to create a time-based chart that shows the count of transactions for each status value over time.

The graph shows the following:

• It is a line graph with two lines, one yellow and one blue.
• The x-axis is labeled with dates from Wed, Apr 4, 2018 to Tue, Apr 10, 2018.
• The y-axis is labeled with numbers from 0 to 15.
• The yellow line represents “shipped” and the blue line represents “success”.
• The yellow line has a steady increase from 0 to 15, while the blue line has a sharp increase from 0 to 5, then a decrease to 0, and then a sharp increase to 10.
• The graph is titled “Type”.

Therefore, option C is the correct answer.

https://docs.splunk.com/Documentation/Splunk/8.1.2/SearchReference/Chart

The Splunk Common Information Model (CIM) Add-on includes a variety of data models designed to normalize data from different sources to allow for cross-source reporting and analysis. Among the data models included, Alerts (Option B) and Email (Option D) are part of the CIM. The Alerts data model is used for data related to alerts and incidents, while the Email data model is used for data pertaining to email messages and transactions. User permissions (Option A) and Databases (Option C) are not data models included in the CIM; rather, they pertain to aspects of data access control and specific types of data sources, respectively, which are outside the scope of the CIM's predefined data models.

When using the Field Extractor (FX) in Splunk for regex field extraction, it's important to select the context in which you want to perform the extraction. The context is essentially the subset of data you're focusing on for your field extraction task.

D. Sourcetype or source: This is the correct option. In the initial steps of using the Field Extractor tool, you're prompted to choose a data type for your field extraction. The options available are typically based on the nature of your data and how it's organized in Splunk. "Sourcetype" refers to the kind of data you're dealing with, a categorization that helps Splunk apply specific processing rules. "Source" refers to the origin of the data, like a specific log file or data input. By selecting either a sourcetype or source, you're narrowing down the dataset on which you'll perform the regex extraction, making it more manageable and relevant.

To create a tag, the user must have the tag capability associated with their user role. The tag capability allows the user to create, edit, and delete tags. The user does not need to identify a field:value pair, have the Power role, or be able to edit the sourcetype the tag applies to.ReferencesSee Define and manage tags in Settings and [About capabilities] in the Splunk Documentation.

 The transaction and stats commands are two ways to group events from one or more data sources based on common fields or time ranges. The transaction command creates a single event out of a group of related events, while the stats command calculates summary statistics over a group of events. The eval and coalesce commands are used to create or combine fields, not to group events. The format command is used to format the results of a subsearch, not to group events. The top and rare commands are used to rank the most or least common values of a field, not to group events23

1: Splunk Core Certified Power User Track, page 9. 2: Splunk Documentation, transaction command. 3: Splunk Documentation, stats command.

The Field Extractor (FX) is a tool that helps you extract fields from your events using a graphical interface or by manually editing the regular expression2. The FX allows you to create field extractions that persist as knowledge objects, which are entities that you create to add knowledge to your data and make it easier to search and analyze2. Field extractions are methods that extract fields from your raw data using various techniques such as regular expressions, delimiters or key-value pairs2. When you create a field extraction using the FX, you can save it as a knowledge object that applies to your data at search time2. You can also manage and share your field extractions with other users in your organization2. Therefore, option C is correct, while options A, B and D are incorrect because they do not describe the use of the FX.

To use a search macro in a search string, you need to place a back tick character (`) before and after the macro name1. You also need to use the same number of arguments as defined in the macro2. The macro weekly sales (2) has two arguments: Price and AmountSold. Therefore, you need to provide two values for these arguments when you call the macro.

The option A is incorrect because it uses parentheses instead of back ticks around the macro name. The option B is incorrect because it uses underscores instead of spaces in the macro name. The option D is incorrect because it uses spaces instead of commas to separate the argument values.

The correct answer is B. Pivot1.

In Splunk, Pivot is a tool that uses data models to generate reports and dashboard panels without the need for users to write or understand Splunk’s Search Processing Language (SPL)1. Data models enable users of Pivot to create compelling reports and dashboards1. When a Pivot user designs a pivot report, they select the data model that represents the category of event data that they want to work with1. Then they select a dataset within that data model that represents the specific dataset on which they want to report1. This makes Pivot a powerful tool for users who need to create visualizations but do not have a deep understanding of SPL1.

The time range specified for a historical search defines the amount of data fetched from the index matching that time range2. A historical search is a search that runs over a fixed period of time in the past2. When you run a historical search, Splunk searches the index for events that match your search string and fall within the specified time range2. Therefore, option B is correct, while options A and C are incorrect because they are not what the time range defines for a historical search.

The searches A and C show a valid use of a macro. A macro is a reusable piece of SPL code that can be called by using single quotes (‘’). A macro can take arguments, which are passed inside parentheses after the macro name. For example, ‘makeMyField(oldField)’ calls a macro named makeMyField with an argument oldField. The searches B and D are not valid because they use double quotes (“”) instead of single quotes (‘’).

• Tags are a knowledge object that allow you to assign an alias to one or more field values . Tags are applied to events at search time and can be used as search terms or filters .
• Tags can help you make your data more understandable by replacing cryptic or complex field values with meaningful names . For example, you can tag the value 200 in the status field as success, or tag the value 404 as not_found .

A report is a way to save a search and its results in a format that you can reuse and share with others2. A report is also a type of knowledge object, which is an entity that you create to add knowledge to your data and make it easier to search and analyze2. Therefore, option A is correct. A report can be scheduled, which means that you can configure it to run at regular intervals and send the results to yourself or others via email or other methods2. Therefore, option B is correct. A report can run a script, which means that you can specify a script file to execute when the report runs and use it to perform custom actions or integrations2. Therefore, option C is correct. Therefore, option D is correct because all of the above statements are true for reports.

In Splunk, when using the chart command, the useother parameter can be set to false (f) to remove the 'OTHER' category, which is a bucket that Splunk uses to aggregate low-cardinality groups into a single group to simplify visualization. Here's how the options break down:

A. | chart count over CurrentStanding by Action useother=fThis command correctly sets the useother parameter to false, which would prevent the 'OTHER' category from being displayed in the resulting visualization.

B. | chart count over CurrentStanding by Action usenull=f useother=tThis command has useother set to true (t), which means the 'OTHER' category would still be included, so this is not a correct option.

C. | chart count over CurrentStanding by Action limit=10 useother=fSimilar to option A, this command also sets useother to false, additionally imposing a limit to the top 10 results, which is a way to control the granularity of the chart but also to remove the 'OTHER' category.

D. | chart count over CurrentStanding by Action limit-10This command has a syntax error (limit-10 should be limit=10) and does not include the useother=f clause. Therefore, it would not remove the 'OTHER' category, making it incorrect.

The correct answers to rewrite the syntax to remove the 'OTHER' category are options A and C, which explicitly set useother=f.

Child datasets can be added to root datasets to narrow down the search. Datasets are collections of events that represent your data in a structured and hierarchical way. Datasets can be created by using commands such as datamodel or pivot. Datasets can have different types, such as events, search, transaction, etc. Datasets can also have different levels, such as root or child. Root datasets are base datasets that contain all events from a data model or an index. Child datasets are derived datasets that contain a subset of events from a parent dataset based on some constraints, such as search terms, fields, time range, etc. Child datasets can be added to root datasets to narrow down the search and filter out irrelevant events.

The correct answer is B. A field added by an automatic lookup.

A calculated field is a field that is added to events at search time by using an eval expression. A calculated field can use the values of two or more fields that are already present in the events to perform calculations. A calculated field can use any field as a source, as long as the field is extracted before the calculated field is defined1.

An automatic lookup is a way to enrich events with additional fields from an external source, such as a CSV file or a database. An automatic lookup can add fields to events based on the values of existing fields, such as host, source, sourcetype, or any other extracted field2. An automatic lookup is performed before the calculated fields are defined, so the fields added by the lookup can be used as sources for the calculated fields3.

Therefore, a calculated field can use a field added by an automatic lookup as a source.

References:

• About calculated fields
• About lookups
• Search time processing

 To configure a Search Workflow Action to run at the same time range as the original search, you need to select the “Use the same time range as the search that created the field listing” checkbox. This will ensure that the workflow action search uses the same earliest and latest time parameters as the original search.

The correct command to show the total bytes for each unique combination of page and server is index=web | stats sum (bytes) BY page server. In Splunk, the stats command is used to calculate aggregate statistics over the dataset, such as count, sum, avg, etc. When using the BY clause, it groups the results by the specified fields. The correct syntax does not include commas or the word ‘AND’ between the field names. Instead, it simply lists the field names separated by spaces within the BY clause.

References:The usage of the stats command with the BY clause is confirmed by examples in the Splunk Community, where it’s explained that stats with a by foo bar will output one row for every unique combination of the by fields1.

The Splunk Common Information Model (CIM) provides a methodology to normalize data from different sources and source types. The CIM defines a common set of fields and tags for different types of data, such as web, network, email, etc. This allows you to search and analyze data from different sources in a consistent way.

When using the Field Extractor (FX) tool in Splunk and the tool fails to extract a value from all appropriate events, there are specific steps you can take to improve the extraction process. These steps involve interacting with the FX tool and possibly adjusting the extraction method:

A. Select an additional sample event with the Field Extractor (FX) and highlight the missing value in the event. This approach allows Splunk to understand the pattern better by providing more examples. By highlighting the value in another event where it wasn't extracted, you help the FX tool to learn the variability in the data format or structure, improving the accuracy of the field extraction.

D. Edit the regular expression manually. Sometimes the FX tool might not generate the most accurate regular expression for the field extraction, especially when dealing with complex log formats or subtle nuances in the data. In such cases, manually editing the regular expression can significantly improve the extraction process. This involves understanding regular expression syntax and how Splunk extracts fields, allowing for a more tailored approach to field extraction that accounts for variations in the data that the automatic process might miss.

Options B and C are not typically related to improving field extraction within the Field Extractor tool. Re-ingesting data (B) does not directly impact the extraction process, and changing to a delimited extraction method (C) is not always applicable, as it depends on the specific data format and might not resolve the issue of missing values across events.

The correct answer is B. Use the field values in an HTTP error event to create a new ticket in an external system.

A workflow action is a knowledge object that enables a variety of interactions between fields in events and other web resources. Workflow actions can create HTML links, generate HTTP POST requests, or launch secondary searches based on field values1.

There are three types of workflow actions that can be set up using Splunk Web: GET, POST, and Search2.

• GET workflow actions create typical HTML links to do things like perform Google searches on specific values or run domain name queries against external WHOIS databases2.
• POST workflow actions generate an HTTP POST request to a specified URI. This action type enables you to do things like creating entries in external issue management systems using a set of relevant field values2.
• Search workflow actions launch secondary searches that use specific field values from an event, such as a search that looks for the occurrence of specific combinations of ipaddress and http_status field values in your index over a specific time range2.

Therefore, the example that would use a POST workflow action is B. Use the field values in an HTTP error event to create a new ticket in an external system. This example requires sending an HTTP POST request to the URI of the external system with the field values from the event as arguments.

The other examples would use different types of workflow actions. These examples are:

• A. Perform an external IP lookup based on a domain value found in events: This example would use a GET workflow action to create a link to an external IP lookup service with the domain value as a parameter.
• C. Launch secondary Splunk searches that use one or more field values from selected events: This example would use a Search workflow action to run another Splunk search with the field values from the event as search terms.
• D. Open a web browser to look up an HTTP status code: This example would also use a GET workflow action to create a link to a web page that explains the meaning of the HTTP status code.

References:

• Splexicon:Workflowaction
• About workflow actions in Splunk Web

POST workflow actions are custom actions that send a POST request to a web server when you click on a field value in your search results. POST workflow actions can be configured with various options, such as label name, base URL, URI parameters, post arguments, app context, etc. One of the options that are required to create a POST workflow action is post arguments. Post arguments are key-value pairs that are sent in the body of the POST request to provide additional information to the web server. Post arguments can include field values from your data by using dollar signs around the field names.

Auto-Extracted fields in Splunk Data Models are derived directly from the indexed data based on the existing fields within the events. These fields are identified and extracted by Splunk automatically, without the need for explicit field extractions configured by the user. Understanding the characteristics of Auto-Extracted fields is crucial for effectively managing Data Models and utilizing them in Pivot tables for analysis.

A. Auto-Extracted fields can be hidden in Pivot. This is true. When building a Data Model, you have the option to hide certain fields from appearing in Pivot, making the Pivot table cleaner and more focused on the fields that are most relevant for analysis. This helps in reducing clutter and focusing on the data that matters most to the users.

B. Auto-Extracted fields can have their data type changed. This statement is not typically accurate for Auto-Extracted fields. The data type of an Auto-Extracted field is determined by Splunk based on the field's content in the indexed data. While you can assign a type to a field when you manually create a field in a data model, the inherent data type of Auto-Extracted fields is not something that is changed within the Data Model itself.

C. Auto-Extracted fields can be given a friendly name for use in Pivot. This is correct. Within Data Models, you can assign a more user-friendly, descriptive name to an Auto-Extracted field. This feature is particularly useful in making Data Models more intuitive and easier to use for those who may not be familiar with the original field names or when the original field names are not descriptive or user-friendly.

D. Auto-Extracted fields can be added if they already exist in the dataset with constraints. This is true. Auto-Extracted fields are based on fields that already exist in the data. When you define a dataset within a Data Model, you can apply constraints to narrow down the events that the dataset includes. The Auto-Extracted fields are then identified from this constrained dataset. This means that the fields must already be present in the data that meets the dataset's constraints to be available for auto-extraction.

In summary, Auto-Extracted fields in Splunk Data Models offer a flexible and efficient way to utilize existing data fields within Pivot tables, with options to rename them for clarity and hide unnecessary fields to streamline data analysis.

Selected fields are fields that you choose to display in your search results by clicking on them in the Fields sidebar or by using the fields command2. Selected fields are displayed below each event in the search results, along with their values2. Therefore, option A is correct, while options B, C and D are incorrect because they are not places where selected fields are displayed.

A delimiter field extraction is a method of extracting fields from data that uses a character or a string to separate fields in each event. A delimiter field extraction can be performed by using the Field Extractor (FX) tool or by editing the props.conf file. A delimiter field extraction can be applied to any file format that uses a delimiter to separate fields, such as CSV, TSV, PSV, etc. A CSV file is a comma-separated values file that uses commas as delimiters. Therefore, a CSV file can be extracted using a delimiter field extraction.

Event types are custom categories of events that are based on search criteria. Event types can be used to label events with meaningful names, such as error, success, login, logout, etc. Event types can also be used to create transactions, alerts, reports, dashboards, etc. Event types can be created in two ways:

• By going to the Settings menu and clicking Event Types > New. This will open a form where you can enter the name, description, search string, app context, and tags for the event type.
• By selecting an event in search results and clicking Event Actions > Build Event Type. This will open a dialog box where you can enter the name and description for the event type. The search string will be automatically populated based on the selected event.

Event types cannot be created by using the searchtypes command in the search bar, as this command does not exist in Splunk. Event types can also be created by editing the event_type stanza in the transforms.conf file, not the props.conf file.

The Field Extractor (FX) allows you to use regular expressions (regex) to extract fields from your events using a graphical interface or by manually editing the regex2. When you use the FX to perform a regex field extraction, you can use the require option to specify a string that must be present in an event for it to be included in the extraction2. This way, you can filter out events that do not contain the required string and focus on the events that are relevant for your extraction2. Therefore, option D is correct, while options A, B and C are incorrect.

After manually editing a regular expression (regex) that was created using the Field Extractor (FX) UI, it is no longer possible to edit the field extraction in the FX UI. The FX UI is a tool that helps you extract fields from your data using delimiters or regular expressions. The FX UI can generate a regex for you based on your selection of sample values or you can enter your own regex in the FX UI. However, if you edit the regex manually in the props.conf file, the FX UI will not be able to recognize the changes and will not let you edit the field extraction in the FX UI anymore. You will have to use the props.conf file to make any further changes to the field extraction. Changes made manually cannot be reverted in the FX UI, as the FX UI does not keep track of the changes made in the props.conf file. It is possible to manually edit a regex that was created using the FX UI, as long as you do it in the props.conf file.

Therefore, only statement B is true about manually editing a regex.

Data model acceleration is a feature that speeds up searches on data models by creating and storing summaries of the data model datasets1. To enable data model acceleration, you must have administrative permissions or the accelerate_datamodel capability1. Therefore, option D is correct. Accelerated data models cannot be edited unless you disable the acceleration first1. Therefore, option B is correct. Private data models cannot be accelerated because they are not visible to other users1. Therefore, option C is correct. Root events can be accelerated as long as they are not based on a search string1. Therefore, option A is incorrect.

The eval command supports a number of functions that you can use in your expressions to perform calculations, conversions, string manipulations and more2. One of the eval command functions is tostring(), which converts a numeric value to a string value2. Therefore, option D is correct, while options A, B and C are incorrect because they are not valid eval command functions.

This search uses the transaction command to group events that share a common value for JSESSIONID into transactions1. The transaction command assigns a duration field to each transaction, which is the difference between the latest and earliest timestamps of the events in the transaction1. The search then uses the timechart command to create a time-series chart of the average duration of each transaction1. Therefore, option A is correct because it describes the search accurately. Option B is incorrect because the search does not use the stats command or the pause field. Option C is incorrect because the transaction command does not require the startswith and endswith options, although they can be used to specify how to identify the beginning and end of a transaction1. Option D is incorrect because the transaction command does not have to be the last command in the search pipeline, although it is often used near the end of a search1.

The Splunk Common Information Model (CIM) add-on is a collection of pre-built data models and knowledge objects that help you normalize your data from different sources and make it easier to analyze and report on it3. The CIM add-on includes pre-configured data models that cover various domains such as Alerts, Email, Database, Network Traffic, Web and more3. Therefore, option B is correct. The CIM add-on also includes fields and event category tags that define the common attributes and labels for the data models3. Therefore, option C is correct. The CIM add-on does not include custom visualizations or automatic data model acceleration. Therefore, options A and D are incorrect.

A macro is a way to save a commonly used search string as a variable that you can reuse in other searches1. When you create a macro, you can define arguments that are placeholders for values that you specify at execution time1. The argument values are used to resolve the search string when the macro is invoked, not when it is created1. Therefore, statements B and C are true, while statements A and D are false.

GET workflow actions are custom actions that open a URL link when you click on a field value in your search results. GET workflow actions can be configured with various options, such as label name, base URL, URI parameters, app context, etc. One of the options is to choose whether to open the URL link in the current window or in a new window. GET workflow actions do not have to be configured with POST arguments, as they use GET method to send requests to web servers. Configuration of GET workflow actions does not include choosing a sourcetype, as they do not generate any data in Splunk. Label names for GET workflow actions must include a field name surrounded by dollar signs, as this indicates the field value that will be used to replace the variable in the URL link.

The transaction command is used to group events into transactions based on some common characteristics, such as fields, time, or both. The transaction command can also specify start and end constraints for the transactions, such as a field value that indicates the beginning or the end of a transaction. The stats command is used to calculate summary statistics on the events, such as count, sum, average, etc. The stats command cannot group events based on start and end constraints, but only on fields or time buckets. Therefore, the transaction command should be used instead of the stats command when you need to group events based on start and end constraints.

Data models and pivot are both knowledge objects in Splunk that allow you to analyze and visualize your data in different ways. Data models are collections of datasets that represent your data in a structured and hierarchical way. Data models define how your data is organized into objects and fields. Pivot is a user interface that allows you to create data visualizations that present different aspects of a data model. Pivot does not require users to input SPL searches on data models, but rather lets them select options from menus and forms. Data models are not created out of datasets called pivots, but rather pivots are created from datasets in data models.

The command sourcetype=access_combined | transaction JSESSIONID does three things:

• It filters the events by the sourcetype access_combined, which is a predefined sourcetype for Apache web server logs.
• It groups the events by the field JSESSIONID, which is a unique identifier for each user session.
• It creates a single event from each group of events that share the same JSESSIONID value. This single event will have some additional fields created by the transaction command, such as duration, eventcount, and startime.

Therefore, the statements B, C, and D are true.

As mentioned before, a calculated field is a field that you create based on the value of another field or fields2. A calculated field can be based on extracted fields, which are fields that are extracted from your raw data using various methods such as regular expressions, delimiters or key-value pairs2. Therefore, option B is correct, while options A, C and D are incorrect because they are not types of fields that a calculated field can be based on.

The search string below returns events from the data model named Application_State.

| datamodel Application_State All_Application_State search

The search string does the following:

• It uses the datamodel command to access a data model in Splunk. The datamodel command takes two arguments: the name of the data model and the name of the dataset within the data model.
• It specifies the name of the data model as Application_State. This is a predefined data model in Splunk that contains information about web applications.
• It specifies the name of the dataset as All_Application_State. This is a root dataset in the data model that contains all events from all child datasets.
• It uses the search command to filter and transform the events from the dataset. The search command can use any search criteria or command to modify the results.

Therefore, the search string returns events from the data model named Application_State.

 The data model command allows you to run searches on data models that have been accelerated1. The syntax for using the data model command is | datamodel [search ]1. Therefore, option A is the correct way to use the data model command to search fields in the data model within the web dataset. Options B and C are incorrect because they do not follow the syntax for the data model command. Option D is incorrect because it does not use the data model command at all.

To create a macro that accepts arguments, you must include the number of arguments in parentheses at the end of the macro name1. For example, my_macro(3) is a macro that accepts three arguments. The number of arguments in the macro name must match the number of arguments in the definition1. Therefore, option A is correct, while options B, C and D are incorrect.

The search string below creates a table of the total count of mysterymeat corndogs split by user.

| stats count by user | where corndog=mysterymeat

The search string does the following:

• It uses the stats command to calculate the count of events for each value of the user field. The stats command creates a table with two columns: user and count.
• It uses the where command to filter the results by the value of the corndog field. The where command only keeps the rows where corndog equals mysterymeat.

Therefore, the search string creates a table of the total count of mysterymeat corndogs split by user.